This article has been reviewed by the following Topic Editor: Tom Lawrence
Francis Thomas Bacon (1904-1992), British engineer who developed the first practical hydrogen-oxygen fuel cells. Building on the work of Sir William Grove, who discovered the principles behind the operation of fuel cells in 1839, Bacon made a number of breakthroughs. These included using potassium hydroxide (KOH) instead of acid electrolytes, or using porous "gas-diffusion electrodes" rather than solid electrodes and pressurized gases to keep the electrolyte from "flooding" the tiny pores of the electrodes. In 1932, these advances resulted in the first successful fuel cell devices. In 1959, a quarter of a century later, Bacon and his coworkers demonstrated a practical five-kilowatt system capable of powering a welding machine.
Cutler Cleveland (Lead Author);Tom Lawrence (Topic Editor) "Bacon, Francis Thomas". In: Encyclopedia of Earth. Eds. Cutler J. Cleveland (Washington, D.C.: Environmental Information Coalition, National Council for Science and the Environment). [First published in the Encyclopedia of Earth August 18, 2006; Last revised Date August 18, 2006; Retrieved February 9, 2012 <http://www.eoearth.org/article/Bacon%2C_Francis_Thomas>
The Author
Editor-in-Chief
The Encyclopedia of Earth Cutler J. Cleveland is the founding Editor-in-Chief of the Encyclopedia of Earth. Dr. Cleveland is currently a Professor in the Department of Geography and Environment at Boston University, with joint appointments in the Center for Energy and Environmental Studies and the Pardee Center for the Study of the Longer Range Future. He also is a Senior Fellow at the National Council for Science and the Environment in Washington D.C. Dr. Cleveland is als ... (Full Bio)
Francis Thomas Bacon (1904-1992), British engineer who developed the first practical hydrogen-oxygen fuel cells. Building on the work of Sir William Grove, who discovered the principles behind the operation of fuel cells in 1839, Bacon made a number of breakthroughs. These included using potassium hydroxide (KOH) instead of acid electrolytes, or using porous "gas-diffusion electrodes" rather than solid electrodes and pressurized gases to keep the electrolyte from "flooding" the tiny pores of the electrodes. In 1932, these advances resulted in the first successful fuel cell devices. In 1959, a quarter of a century later, Bacon and his coworkers demonstrated a practical five-kilowatt system capable of powering a welding machine.
Comments
There are no comments.