Health effects of antimony

Introduction

Antimony is a silvery white metal of medium hardness that breaks easily. Small amounts of antimony are found in the earth's crust. Antimony ores are mined and then either changed into antimony metal or combined with oxygen to form antimony oxide.

Antimony oxide is a white powder that does not evaporate. Only a small amount of it will dissolve in water. Most antimony oxide produced is added to textiles and plastics to prevent their catching on fire.

Antimony metal is too easily broken to be used much by itself. To make it stronger, a little antimony is usually mixed with other metals such as lead and zinc to form mixtures of metals called alloys. These alloys are used in lead storage batteries, solder, sheet and pipe metal, bearings, castings, type metal, ammunition, and pewter.

Antimony enters the environment during the mining and processing of its ores and in the production of antimony metal, alloys, antimony oxide, and combinations of antimony with other substances. Little or no antimony is mined in the United States. Antimony ore and impure metals are brought into this country from other countries for processing. Small amounts of antimony are also released into the environment by incinerators and coal-burning power plants. The antimony that comes out of the smoke stacks of these plants is attached to very small particles that settle to the ground or are washed out of the air by rain. It usually takes many days for antimony to be removed from the air. Antimony attached to very small particles may stay in the air for more than a month. Antimony cannot be destroyed in the environment. It can only change its form or become attached to or separated from particles. Most antimony will end up in the soil or sediment, where it attaches strongly to particles that contain iron, manganese, or aluminum.

Exposure to antimony

Antimony is found at very low levels in the environment, so low that we often cannot measure it. You may be exposed to antimony by breathing air, drinking water, and eating foods that contain it. You also may be exposed by skin contact with soil, water, and other substances that contain antimony. The analytical methods used by scientists testing for the presence of antimony in the environment do not determine the specific form of antimony present. Therefore, we do not always know what form of antimony persons may be exposed to. Similarly, we do not know what forms of antimony are found in hazardous waste sites. Much of the antimony found in sediment, soil, and rock is so strongly attached to dust and dirt or buried in minerals that it cannot easily affect your health. Some antimony in the environment is less tightly attached to particles and may be taken up by plants and animals.

The concentration of antimony in air ranges from a very small part of a nanogram (1 nanogram equals a billionth of a gram) in a cubic meter (m³) of air (ng/m³) to about 170 ng/m³. However, near companies that change antimony ores into metal or make antimony oxide, concentrations may be more than 1,000 ng/m³. You may breathe high levels of antimony in dust if you live or work near antimony mines or processing companies.

The concentration of antimony that is dissolved in rivers and lakes is very low, usually less than 5 parts of antimony in 1 billion parts of water (ppb). We cannot measure such small amounts without special equipment. Antimony does not appear to accumulate in fish and other aquatic animals. The concentration of antimony dissolved in one polluted river where wastes from antimony mining and processing had been dumped was as high as 8 ppb. Most of the antimony in the river, however, was not dissolved, but was attached to particles of dirt. Although antimony is used in solder for water pipes, it does not seem to get into the drinking water.

Soil usually contains very low concentrations of antimony, less than 1 part of antimony in a million parts of soil (ppm). However, concentrations close to 9 ppm have been found. The highest soil concentrations found at hazardous waste sites on the NPL and at antimony-processing sites range from 109 to 2,550 ppm. High concentrations of antimony may be found in soil because dust sent out during processing settles out from the air. Also, waste from antimony-processing and other antimony-using industries is usually dumped onto the soil. We do not know the form of antimony at these sites. However, we know that much of the antimony in antimony-processing wastes is strongly attached to soil. You may be exposed to this antimony by skin contact. Children may also be exposed to this antimony by eating the dirt.

Food usually contains small amounts of antimony. You eat and drink about 5 micrograms (5 millionths of a gram) of antimony every day. The average concentration of antimony in meats, vegetables, and seafood is 0.2–1.1 ppb. The antimony oxide that is added to many materials for fire protection is very tightly attached to these materials and does not expose people to antimony.

You may also be exposed to antimony in the workplace. If you work in industries that process antimony ore and metal or make chemicals that contain antimony, such as antimony oxide, you may be exposed to antimony by breathing dust or by skin contact.

Pathways of antimony in the body

Antimony can enter your body when you drink water or eat food, soil, or other substances that contain antimony. Antimony can also enter your body if you breathe air or dust containing antimony. We do not know if antimony can enter your body when it is placed on your skin.

A small amount of the antimony you eat or drink enters the blood after a few hours. The amount and the form of antimony in the food or water will affect how much antimony enters your blood. After you eat or drink very large doses of antimony, you may vomit. This will prevent most of the antimony from entering through the stomach and intestines into your blood. Antimony in your lungs will enter your blood after several days or weeks. The amount of antimony that will enter your blood from your lungs is not known.

After antimony enters your blood, it goes to many parts of your body. Most of the antimony goes to the liver, lungs, intestines, and spleen. Antimony will leave your body in feces and urine over several weeks.

Health effects of antimony

Exposure to 9 milligrams per cubic meter of air (mg/m³) of antimony for a long time can irritate your eyes, skin, and lungs. Breathing 2 mg/m³ of antimony for a long time can cause problems with the lungs (pneumoconiosis), heart problems (altered electrocardiograms), stomach pain, diarrhea, vomiting, and stomach ulcers. People who drank over 19 ppm of antimony once, vomited. We do not know what other health effects would occur to people who swallow antimony. We do not know if antimony can cause cancer or birth defects, or affect reproduction in humans. Antimony can have beneficial effects when used for medical reasons. It has been used as a medicine to treat people infected with parasites. Persons who have had too much of this medicine or are sensitive to it when it was injected into their blood or muscle have experienced adverse health effects. These health effects include diarrhea, joint and/or muscle pain, vomiting, problems with the blood (anemia) and heart problems (altered electrocardiograms).

Rats and guinea pigs that breathed very high levels of antimony for a short time died. Rats breathing high levels of antimony for several days had lung, heart, liver, and kidney damage. Breathing very low levels of antimony for a long time has resulted in eye irritation, hair loss, and lung damage in rats. Dogs and rats that breathed low levels of antimony for a long period had heart problems (changes in EKGs). Problems with fertility have been observed in rats that breathed very high levels of antimony for a couple of months. Lung cancer has been observed in some studies of rats breathing high concentrations of antimony. Antimony has not been classified for cancer effects by the Department of Health and Human Services (DHHS), the International Agency for Research on Cancer (IARC), or the Environmental Protection Agency (EPA).

Dogs that drank very high levels of antimony for several weeks lost weight and had diarrhea. Rats that drank very low levels of antimony for most of their lives died sooner than rats not drinking antimony. Rats eating high levels of antimony for a long time had liver damage and fewer red blood cells.

Rabbits that had very small amounts of antimony placed on their skin for less than 1 day had skin irritation. Small amounts of antimony placed in rabbit eyes resulted in eye irritation. Large amounts of antimony placed on rabbit's skin resulted in death.

You should know that one way to learn whether a chemical will harm people is to determine how the body absorbs, uses, and releases the chemical. For some chemicals, animal testing may be necessary. Animal testing may also help identify such health effects as cancer or birth defects. Without laboratory animals, scientists would lose a basic method for getting information needed to make wise decisions that protect public health. Scientists have the responsibility to treat research animals with care and compassion. Scientists must comply with strict animal care guidelines because laws today protect the welfare of research animals.

Additionally, there are vigorous national and international efforts to develop alternatives to animal testing. The efforts focus on both in vitro and in silico approaches and methods. For example, the National Toxicology Program (NTP) at the National Institute of Environmental Health Sciences (NIEHS) created the NTP Interagency Center for the Evaluation of Alternative Toxicological Methods (NICEATM) in 1998. The role of NICEATM is to serve the needs of high quality, credible science by facilitating development and validation—and regulatory and public acceptance—of innovative, revised test methods that reduce, refine, and replace the use of animals in testing while strengthening protection of human health, animal health and welfare, and the environment. In Europe, similar efforts at developing alternatives to animal based testing are taking place under the aegis of the European Centre for the Validation of Alternative Methods (ECVAM).

Medical tests for exposure to antimony

There are reliable and accurate ways of measuring antimony levels in the body. Antimony can be measured in the urine, feces, and blood for several days after exposure. High levels of antimony in these fluids will show that you have been exposed to high levels of antimony. However, we do not know if such measurements can tell how much antimony you have been exposed to for how long, or what, if any, short-term or long-term health effects you will have.

Further Reading



Disclaimer: This article is taken wholly from, or contains information that was originally published by, the Agency for Toxic Substances and Disease Registry. Topic editors and authors for the Encyclopedia of Earth may have edited its content or added new information. The use of information from the Agency for Toxic Substances and Disease Registry should not be construed as support for or endorsement by that organization for any new information added by EoE personnel, or for any editing of the original content.

Glossary

Citation

(2008). Health effects of antimony. Retrieved from http://www.eoearth.org/view/article/153329

0 Comments

To add a comment, please Log In.