October 28, 2011, 9:07 pm


caption Sperrylite, the only native compound of platinum. (Source: Mineral Information Institute)

The name platinum refers to a mineral, an element and a group of elements. As an element, platinum (chemical symbol Pt) is a silvery-gray metal with an atomic number of 78. It belongs to a group of elements that are in the second and third triads of Group VIII of the Periodic Table of the Elements.

The platinum group of elements consists of metals with similar physical properties. They are among the rarest elements in the Earth’s crust. They have high melting points, are dense or heavy (mineralogists say they have a high specific gravity), and are very non-reactive to other elements and ions. The platinum group elements include: ruthenium (44), rhodium (45), palladium (46), osmium (76), iridium (77) and platinum (78). Of these elements, only platinum and palladium are found in a pure form in nature. The others occur in nature as natural alloys with platinum and gold, for example. In industry people refer to this group of elements as the platinum group metals, or simply as PGM.

As a mineral, platinum occurs in dark silicate rocks with minerals containing iron and magnesium. It is usually found as fine grains or flakes scattered throughout the rock and rarely as large nuggets. It crystallizes in the cubic crystal system, but rarely forms actual crystals. Platinum is metallic and, like gold and silver, is malleable (it can be hammered into sheets) and ductile (it can be drawn into wire). Most naturally occurring platinum is actually a mixture of platinum and iridium.


Previous Element: Iridium

Next Element: Gold


Physical Properties
Color silvery-white
Phase at Room Temp. solid
Density (g/cm3) 21.41
Hardness (Mohs) 4.3
Melting Point (K) 2045.2
Boiling Point (K) 4443
Heat of Fusion (kJ/mol) 19.7
Heat of Vaporization (kJ/mol) 510
Heat of Atomization (kJ/mol) 565
Thermal Conductivity (J/m sec K) 71.6
Electrical Conductivity (1/mohm cm) 94.34
Source Nickel ores (sulfides)
Atomic Properties
Electron Configuration [Xe]6s14f145d9
Number of Isotopes 43 (6 natural)
Electron Affinity (kJ/mol) 205.3
First Ionization Energy (kJ/mol) 870
Second Ionization Energy (kJ/mol) 1791
Third Ionization Energy (kJ/mol) ---
Electronegativity 2.28
Polarizability (Å3) 6.5
Atomic Weight 195.08
Atomic Volume (cm3/mol) 9.1
Ionic Radius2- (pm) ---
Ionic Radius1- (pm) ---
Atomic Radius (pm) 139
Ionic Radius1+ (pm) ---
Ionic Radius2+ (pm) 94
Ionic Radius3+ (pm) ---
Common Oxidation Numbers +2, +4
Other Oxid. Numbers +5, +6
In Earth's Crust (mg/kg) 5.0x10-3
In Earth's Ocean (mg/L) ---
In Human Body (%) 0%
Regulatory / Health
CAS Number 7440-06-4
OSHA Permissible Exposure Limit (PEL) ---
OSHA PEL Vacated 1989 TWA: 1 mg/m3
NIOSH Recommended Exposure Limit (REL) TWA: 1 mg/m3
University of Wisconsin General Chemistry
Mineral Information Institute
Jefferson Accelerator Laboratory

Platinum has been known and used since antiquity in South America, where the use of platinum by the natives was discovered by Antonio de Ulloa of Spain in 1735. Because it is silver-gray in color, it was named after the Spanish word for silver, plata.


Geologically, platinum is found in thin layers of metal ores called sulfides. These sulfide ores are found in mafic igneous rocks (that is, dark igneous rocks with high iron and magnesium content).

In the United States, the only mines producing platinum group metals (PGM) are in what geologists call the Stillwater Complex of Montana. In recent years, old mines have been enlarged and a new mine has been established in this complex. Small amounts of PGM are recovered from copper processing in Texas and Utah.

In 1822 large amounts of platinum were discovered in the Ural Mountains in Russia. Russia continues to be an important world source of PGM to this day. The most productive PGM mines are in South Africa in a geologic region known as the Bushveld Complex. Canada, Zimbabwe, and Australia also produce PGM.

Significant amounts of platinum are recovered annually through recycling. In 1999, for example, 70 metric tons was recovered through recycling. This will continue to be an important part of PGM supplies in the future.


Most platinum is used to produce catalytic converters in automobile exhaust systems. The goal is to limit the smog-producing chemicals that come from burning gasoline. When an internal combustion engine burns gasoline, nitrogen oxides ([[NOx]]) are produced. The exhaust passes through the catalytic converter that contains platinum and iridium. The gases are in the converter for 0.1 to 0.4 seconds and in that very short time, 75% of the nitrogen oxide is converted into nitrogen and oxygen. In addition, more than 95% of carbon monoxide and other hydrocarbons in the exhaust are oxidized. The platinum works by lowering the energy needed to cause these chemical changes. The result is a dramatic reduction in pollution.

Although about one-third of all platinum is used by the automotive industry, there are various other uses. It is alloyed with gold, silver and copper for dental uses. PGM is used in chemotherapy, particularly to fight leukemia. Platinum-iridium compounds are used to make biomedical devices. An alloy of platinum and osmium is used in pacemakers to regulate heart function and in heart replacement valves.

Substitutes and Alternative Sources

Some manufacturers are using less expensive palladium in place of platinum in catalytic converters. As a catalytic converter component in diesel engines, palladium is proving to be a better option over platinum.

Further Reading

Disclaimer: This article is taken wholly from, or contains information that was originally published by, the Mineral Information Institute. Topic editors and authors for the Encyclopedia of Earth may have edited its content or added new information. The use of information from the Mineral Information Institute should not be construed as support for or endorsement by that organization for any new information added by EoE personnel, or for any editing of the original content.



Institute, M. (2011). Platinum. Retrieved from


To add a comment, please Log In.