History of Seismometry
The earliest seismoscope was invented in 132 A.D., by Chang Hêng. Seismoscopes of limited effectiveness were used by Bina and others in the eighteenth century. The middle nineteenth century saw the invention by Palmieri of a seismoscope to record the times of small earthquakes.
A successful seismograph of low sensitivity was invented by Cecchi in 1875. British scientists at the College of Engineering, Tokyo, independently built seismographs in the 1880's. The British in Japan made many observations with their instruments and must be credited with first demonstrating the value to seismology of seismographic devices.
Von Rebeur-Paschwitz obtained the first recording of a teleseism in 1889. In the next decade, investigators in Italy, Germany, and England studied the waves from distant earthquakes and constructed the first teleseismic travel-time charts. Wiechert introduced a seismometer with viscous damping in 1898.
Theory seems to have been neglected in the early development of the seismograph. Theoretical studies of forced damped harmonic-oscillator seismographs were presented by Perry and Ayrton, and Lippmann, but these had little effect on the construction of seismographs. In the 1890's, the importance of tilt was much debated. By 1900, many seismologists had become convinced that the effect of tilting on seismograph response could usually be neglected.
This article from the USGS was originally published as History of Seismometry (to 1900) by James Dewey and Perry Byerly, in the Bulletin of the Seismological Society of America. Vol. 59, No. 1, pp. 183-227. February, 1969.
Instruments have been used in the study of earthquakes for over eighteen hundred years. The earliest known seismoscope was intended to record both the occurrence of earthquakes and the azimuths of their origins from the observer. In the eighteenth century, we find proposals to record the times of earthquakes and the character of the ground motion occurring in earthquakes. A most important advance was made late in the nineteenth century, with the invention of instruments which gave records representing earthquake ground motion as a continuous function of time. We will call such instruments seismographs, regardless of the accuracy of their representations of earth motion. Our history will end at the beginning of the twentieth century.
The Earliest Seismoscope
The Chinese philosopher Chang Hêng [Chang Hêng is also referred to as Choko and Tyoko, modifications of the Japanese form of his name (Needham, 1959).] invented the earliest known seismoscope in 132 A.D. A fascinating and complete account of the seismoscope is given by Needham (1959). The instrument was said to resemble a wine jar of diameter six feet (Figure 1). On the outside of the vessel there were eight dragon-heads, facing the eight principal directions of the compass. Below each of the dragon-heads was a toad, with its mouth opened toward the dragon. The mouth of each dragon held a ball. At the occurrence of an earthquake, one of the eight dragon-mouths would release a ball into the open mouth of the toad situated below. The direction of the shaking determined which of the dragons released its ball. The instrument is reported to have detected a four-hundred-mile distant earthquake which was not felt at the location of the seismoscope.
The inside of the Chinese seismoscope is unknown. Seismologists of the nineteenth and twentieth centuries have speculated on mechanisms which would duplicate the behavior of Chang Hêng's seismoscope, but would not be beyond the Chinese technology of Chang Hêng's time. All assume the use of some kind of pendulum as the primary sensing element, the motion of which would activate one of the dragons. In his translation of the original Chinese description of Chang Hêng's seismoscope, Milne (1886b, p. 13-15) implied that the pendulum was a suspended mass, or, as we shall call it, a common pendulum. Imamura (1939) thought an inverted pendulum more probable. Hagiwara constructed an inverted-pendulum seismoscope which behaved nearly as Chang Hêng's was reported to have behaved (Imamura, 1939). The model designed by Hagiwara, however, responded most frequently to transverse motion, and indicated a direction normal to the azimuth between observer and epicenter, whereas the Chinese seismoscope was reported to have indicated the azimuth of the earthquake. Needham (1959, p. 630) has suggested that Chang Hêng's "earthquake weathercock" was calibrated empirically for its direction-determining properties.
Needham reports that knowledge of Chang Hêng's instrument remained for over four centuries. Books describing the working of "earthquake weathercocks" were written as late as the end of the sixth century. In later years, however, the seismoscope seemed to disappear from Chinese science; later Chinese writers questioned that such a machine was possible.
Seismoscopes in Eighteenth Century Europe
We find Europeans writing on earthquake-detecting instruments from the early eighteenth century. In 1703, J. de la Haute Feuille proposed filling a bowl to the brim with mercury, so that an earthquake would cause some of the mercury to spill out (de la Haute Feuille, 1703; Favaro, 1884). In order to determine the direction of the shock, the mercury spilling out in each of the eight principal directions of the compass was to be collected in cavities or other containers. In an earthquake, de la Haute Feuille assumed, the ground would be inclined, and the direction in which the mercury spilled would be away from the origin, "where the ground began to be raised" (Favaro, 1884, p. 95). It is interesting that this earliest of European instruments was expected to respond to tilting of the Earth's surface rather than to horizontal displacements. An indication of the distance of the epicenter and the size of the disturbance could be had from the amount of mercury which had sloshed out.
An important function of de la Haute Feuille's instrument was to provide data from which future earthquakes might be predicted. His proposed method of earthquake prediction was to use his instrument to record the small shocks which he supposed must precede a large earthquake. Each day, an observer would note the amount of mercury spilled out of the bowl, if any had been spilled. If a large amount of mercury spilled out, a large earthquake would probably be imminent. With a large body of observations, patterns might be detected which would enable the prediction of future earthquakes. De la Haute Feuille seemed to believe that earthquakes were caused by the explosion of sulphurous matter and various salts within the Earth. Davison (1927) has indicated that this idea was widespread in de la Haute Feuille's time.
De La Haute Feuille clearly understood that instruments would make an important contribution to seismology. He emphasized the need for large numbers of instrumental observations in order to learn about earthquakes. Nevertheless, there is no evidence that his seismoscope was ever built. De la Haute Feuille's suggestion seems to have had little influence on the development of seismometers. A closely similar instrument was built in 1784 by A. Cavalli, probably without knowledge of de la Haute Feuille's writing (Baratta, 1895, p. 8).
The honor of being the first European to record the use of a mechanical device as an aid to the study of earthquakes goes to Nicholas Cirillo (1747). Cirillo employed simple pendulums in an investigation of a series of earthquakes in Naples in 1731. He observed the amplitude of pendulum oscillations at the locations where the shaking was most severe, and also at locations somewhat removed from the zone of severest shaking. He found the amplitude to decrease with the inverse square of the distance, a result he anticipated from "the common laws in other sorts of motions" (Cirillo, 1747, p. 682).
In 1751, Andrea Bina proposed suspending a common pendulum, with a pointer attached to its lower end, above a tray of fine sand (Bina, 1751). The relative motion of the pendulum bob and the Earth was to be traced in the sand by the pointer. Bina seems to have built his instrument, but we do not know if an earthquake was ever recorded with the device. Bina's instrument was intended to tell the observer the character of the ground motion. The nature of the record traced in the sand would reveal whether the earthquake motion was "regular or swaying ..., tremulous or irregular..." (Bina, 1751, p.46).
The construction of instruments in eighteenth-century Italy frequently coincided with periods of unusually high local seismic activity. The Calabrian earthquakes of 1783 were responsible for the greatest surge of interest. Davison (1936) lists six "principal" earthquakes in this series of shocks. Loss of life and property was enormous. The earthquakes were the subject of several detailed investigations, including a study by the first appointed "Earthquake Commission" (Davison, 1927, p. 29). The use of mechanical devices to verify the occurrence of earthquakes seems to have been natural to people living in areas affected by these shocks. Salfi (1787, p. 46) reported that the general populace used liquid-filled bowls and delicately-balanced objects as seismoscopes.
The shocks also spurred the invention of more elaborate instruments. The most complete treatment of these instruments is given by Baratta (1895), who reproduces important sections of the original papers. Lacking some of the original papers, we have relied heavily on Baratta's study and the portions of the originals reproduced therein.
D. Domemico Salsano, a clock-maker and mechanic of Naples, invented a "geo-sismometro" in February, 1783 (Salsano, 1783). It was operating shortly after the first large Calabrian earthquake. It was a common pendulum, eight and a half "parisian" feet long. The pendulum mass was equipped with a brush, which was to record the motion of the mass with slow-drying ink on an ivory slab.
Reports of the observations made by Salsano (Salsano, 1783; Torcia, 1784) suggest that his pendulum may have responded to some of the earthquakes in Calabria, about two hundred miles away. The nature of the recorded observations suggests that many motions of the pendulum were not due to earthquakes, as might be expected for a pendulum in an unsheltered location. Nevertheless, sometimes the pendulum motions were roughly contemporaneous with earthquakes in Calabria. We are not told how exactly the pendulum motion and the earthquakes coincided in time. It is clear also from the description of observations that most, it not all, of these observations were made by watching the pendulum, rather than by examing records written by the pendulum. The pendulum was arranged to ring a bell when its oscillations were large enough. This it did on several occasions.
Salsano's seismoscope received relatively little mention in the large studies of the Calabrian earthquakes. Baratta notes that some who did refer to the machine treated it with scorn. One writer, F. Salfi, pointed out that the instrument was nothing more than an ordinary pendulum, and criticized those who would "push to the foot of the throne" the merits of its inventor (Salfi, 1787, p. 46). Salfi's statement, however, hints that Salsano's instrument was well known in its time, in spite of the lack of printed recognition. Later, during the New Madrid earthquakes of 1811 and 1812 in America, Daniel Drake of Cincinnatti reported the used of an "instrument constructed on the principle of that used in Naples, at the time of the memorable Calabrian earthquake" which reportedly "marked the direction of undulation from south-southwest to north-northeast" (Fuller, 1912, p.27). Baratta (1895) also mentions a common pendulum constructed by Zupo, which wrote in sand. Perhaps this was the Neapolitan instrument to which Drake referred.
In the years immediately following the Calabrian earthquakes, two other seismic instruments were described which should be mentioned here. A. Cavalli, in 1784, reinvented de la Haute Feuille's mercury-filled-bowl seismoscope (Cavalli, 1785). In addition, he designed a modification of this instrument which would give the time of an earthquake, to the nearest minute. This was to be accomplished by the use of platforms rotating beneath two mercury-filled bowls. As the platforms rotated, cavities corresponding respectively to the hour of the day and the minute of the hour would pass beneath the notches in the sides of the bowls. When mercury overflowed from the bowls through the notches, it would be conveyed into the two cavities corresponding to the hour and minute of the day. The observations reported by Cavalli suggest that the time-telling part of his seismoscope was never built (Cavalli, 1785). This instrument, if it was constructed, was the first designed to tell the time of an earthquake.
The Duca della Torre, A. Filomarino, invented a common pendulum "sismografo", similar to Salsano's, but with the addition of a time-telling device. The first known description of this instrument is from 1796 (della Torre, 1796), although Salsano (1783) mentioned an instrument similar to his own, which he had not seen, invented contemporaneously by Duca della Torre. A record was to be written by a pencil attached to the pendulum and pressed gently with a spring against a piece of paper. On the pendulum mass was to be put a hair, which would arrest the balance wheel of a clock. When the mass moved, the hair would be withdrawn and the clock would start.
Several written records were observed with this instrument. The records consisted of a pencil-line or two for each earthquake. They must have contained little more information about earthquake motion than could have been obtained from "natural seismograms", such as scratches left by a heavy object moving on a smooth surface. Nevertheless, the Duca della Torre is the first to describe a record obtained with an instrument constructed as a seismometer. The observations given by him, as reproduced by Baratta (1895, p. 31) do not suggest that the timing device was functioning.
The "Seismometer" of James Forbes
The interest in seismic instruments generated by the Calabrian earthquakes was not sustained in succeeding years. In 1839, however, a series of small earthquakes began near Comrie, in Perthshire, Scotland. Scores of shocks were felt over a period of several years. A direct result of the Comrie earthquakes was the establishment of a Special Committee of the British Association for the Advancement of Science, the purpose of the committee being to obtain "instruments and registers to record shocks in Great Britain" (Milne, 1842).
The most significant instrument resulting from the committee's work was an inverted-pendulum "seismometer", designed by James Forbes (Forbes, 1844). The seismometer is shown in Figure 2. It consisted of a vertical metal rod having a mass C moveable upon it. The rod was supported on a vertical cylindrical steel wire. The wire could be made more or less stiff by pinching it at a greater or lesser height by means of a screw S. By adjusting the stiffness of the wire, or the height of the ball, the free period of the pendulum might be altered. A pencil L placed on the prolongation of the metal rod wrote a record on a stationary, paper-lined, spherical dome I. By placing the pencil sufficiently far above the mass, a magnification of the motion of the mass by a factor of two or three could be obtained.
Forbes used the inverted pendulum, mounted on a stiff wire, to provide a sensing element in weakly-stable equilibrium, without having to use a very long common pendulum. An upright inverted pendulum, by itself, is in unstable equilibrium. A slight motion topples it over. When the inverted pendulum is mounted on a suitably stiff wire, the apparatus may be rendered stable, so that the inverted pendulum returns to an upright position after having been disturbed. Such a combination had been used already by a Mr. Hardy for the purpose of detecting vibrations set up in a clock frame by the beating of the clock (Kater, 1818).
Forbes was probably the first to attempt explicitly to give a seismological instrument a "long" period. [Forbes speaks of requiring, for earthquake recording, a common pendulum, ten or twenty feet long, which would have a period of four or five seconds (Forbes, 1844, p. 219). Later, in a discussion of the size of his seismometer, he states that the sensibility of seismometers of different size should be the same - "say one second" (Forbes, 1844, p. 221). We suspect, however, that he hoped for a period nearer five seconds than one second, since his seismometer offered no advantage in compactness over a common pendulum with a one-second period. We have found no indication of the period actually obtained with the instrument.] He was also the first to try to avoid the clumsiness of a long common pendulum in obtaining long periods. As we shall see, his method of approaching neutral equilibrium was similar to that used by Wiechert in 1900. Forbes desired a long period in order that the pendulum remain stationary as the Earth moved beneath it. He clearly wanted to measure ground displacement in an earthquake. However, he considered only the effect on his instrument of an "earthquake" consisting of a single, horizontal displacement of uniform velocity, beginning and ending suddenly. For this reason, we can't be sure if Forbes knew that a long-period pendulum would function as a displacement meter for very-short-period oscillations of the ground. For the type of motion he considered, Forbes expected his seismometer to show a straight line, corresponding to the sudden displacement of the Earth, which would be easily distinguished from the ellipsoidal traces caused by the pendulum oscillating about its new equilibrium position.
A mathematical theory of the instrument accompanies its description (Forbes, 1844). Forbes was the first to describe mathematically the behavior of a seismic instrument in an "earthquake". The assumed earthquake, again, is a single motion of uniform velocity, starting and stopping abruptly.
Six of the inverted-pendulum seismometers were set up at Comrie (Milne, 1842, 1843). One was thirty-nine inches long and another was ten feet long. The lengths of the remaining four were not noted. Neither were the periods of the instruments noted. They gave disappointing performances. In one year, for example, the seismometers recorded only three of sixty earthquakes felt at Comrie (Milne, 1843). The nature of the records is difficult to decipher from the descriptions given by the investigators, who mention the indicating pencil being displaced by the quake, but don't mention any records being written by it. They conclude that the motion in the recorded earthquakes consisted of a sudden movement of the ground, with a maximum displacement of one half of an inch horizontally (Milne, 1842, 1843).
Friction between the writing pencil and the recording surface must take some of the blame for the disappointing results given by the seismometer. Forbes was aware of the problem of friction. He attempted to overcome it by using a heavy mass, but he does not seem to have been successful. We will see that friction would severely limit the sensitivity of many later seismographs which had mechanical registration.
Common pendulums and an instrument for measuring vertical motion were also used at Comrie. The vertical motion seismoscope consisted of a horizontal metal bar, loaded with a weight at one end, and fastened to the wall with a flat spring. In an earthquake, the weight was expected to lag behind the ground motion and move a light straw to indicate the extent of vertical motion. The vertical-motion instrument functioned on several occasions, indicating vertical "displacements" as great as half an inch.
Further Studies with Seismoscopes
The years between 1850 and 1870 saw several significant contributions to seismological instrumentation. These included Palmieri's seismoscope for recording the time of an earthquake, and a suggestion by Zöllner that the horizontal pendulum might be used in a seismometer. Mallet studied earthquake motion by observing the effects of earthquakes and by measuring the velocity of elastic waves generated by explosions. A true seismograph still eluded seismologists.
Explosion seismology was born in 1851, when Robert Mallet used dynamite explosions to measure the speed of elastic waves in surface rocks (Mallet, 1852, 1862a). He wished to obtain approximate values for the velocities with which earthquake waves were likely to travel. To detect the waves from the explosions, Mallet looked through an eleven-power magnifier at the image of a cross-hairs reflected in the surface of mercury in a container (see Figure 3). A slight shaking caused the image to blur or disappear. Transit velocities were measured over distances of the order of a thousand feet. For granite, Mallet obtained velocities of about 1600 feet per second. He had expected to find velocities of 8000 feet per second. The unexpectedly low elastic-wave velocity was attributed to the heterogeneity of the rock through which the wave traveled. Later investigators (Abbot, 1878; Fouqué and Levy, 1888), using instruments similar to Mallet's, have found higher velocities and have suggested that Mallet may not have detected the earliest arrivals in his experiments.
Mallet advocated the use of fallen objects and cracks in buildings as aids in the study of earthquakes. He made a detailed investigation of the Neapolitan earthquake of 1857, in which he paid particular attention to the way buildings were cracked, walls overthrown, and soft ground fissured (Mallet, 1862b). Mallet believed that an earthquake consisted primarily of a compression followed by a dilatation. For such a shaking, he suggested, the resulting cracks in structures would be transverse to the direction of wave propagation. Overturned objects would fall along the horizontal projection of the direction of wave propagation. By observing the directions of arrival from a number of different points, he plotted an origin from which the wave seemed to spread. Mallet also published a set of formulae for calculating the velocities necessary to overturn structures of various simple shapes. From these, and observations of overturned objects, he estimated the velocity of particle motion at different sites.
Mallet's assumption that earthquakes consisted mainly of longitudinal motion was proven invalid as soon as seismometers were built which recorded the large transverse component of ground motion. Interest remained in the possibility of using overturned columns and other ruins as seismoscopes for measuring certain parameters of earthquakes, such as particle velocity and acceleration. In the 1880's, investigators in Japan checked Mallet's method of calculating ground velocity from observations of bodies overturned or displaced by earthquake motion. Velocities calculated from Mallet's formulae did not in general agree with those calculated from seismograms (Milne, 1885b). J. Milne and F. Omori introduced a formula for the acceleration necessary to overturn columns, which they checked by putting columns on a cart and shaking them with a sinusoidal motion (Milne and Omori, 1893). Omori applied the formula to gravestones overturned in the epicentral region of the Mino-Owari earthquake of October 28, 1891 (Milne, 1893c). He found accelerations greater than 0.4 g.
A design of a pendulum seismoscope was reported by Kreil (1855). In this instrument, the pendulum mass was to be a cylinder, on which recording paper was to be wrapped. The recording stylus, fixed to the ground, would write on the pendulum mass as it moved in an earthquake. The mass was to be rotated by a clock at a rate of once every twenty-four hours. In this way, the time of an earthquake could be noted. There is no evidence that Kreil's machine was built, although its design seems to have been considered significant by seismologists of the day (Mallet, 1859, p. 76).
In 1858, P. G. M. Cavalleri (1858, 1860) reported the construction of a common-pendulum seismometer similar to that described by Bina, more than one hundred years earlier. As in Bina's instrument, a pointer on the pendulum bob traced a record of the motion of the pendulum in fine powder. Observations of felt earthquakes suggest to Calvalleri that the frequency of earthquake waves would be three cycles per second. For this frequency, the 1.25 meter-long common pendulum would function approximately as a displacement meter, as its inventor intended.
Cavalleri described other instruments. A mass on a spiral spring was intended to detect vertical motion. It had a period of one second - long enough, Cavalleri felt, to record the rapid pulse-like vertical displacement of the ground believed to occur in an earthquake. The mass of this instrument was connected to the short arm of an indicating lever. The lever was constructed so that it would remain at the position of its maximum excursion.
Finally, in order to study the frequency content of earthquake waves, Cavalleri constructed six short pendulums of different periods, each of which traced the record of its motion in fine powder, as the larger pendulum did. Assuming that a range of frequencies from two to four cycles per second would be "sufficient to embrace every undulation occasioned by any earthquake" (Cavalleri, 1860, p. 113), Cavalleri expected that the pendulum whose period was closed to the predominant period of the earthquake would resonate and show a larger amplitude than the other pendulums. This apparatus was new to Europeans. Jared Brooks of Louisville, Kentucky, had constructed pendulums of different lengths to observe the New Madrid earthquakes of 1811 and 1812 (Fuller, 1912, p. 32).
In 1856, Luigi Palmieri installed his "sismografo elettro-magnetico" in the volcanic observatory on Mount Vesuvius (Palmieri, 1871, 1874). This instrument was intended to give the direction, intensity, and duration of an earthquake, and was capable of responding to both horizontal and vertical motions. It was not a "seismograph" in the sense in which we are using the word, but rather a collection of seismoscopes, each intended to record particular parameters of an earthquake (Figure 4).
The seismoscope for detecting vertical motion consisted of a conical mass on a spiral spring. The mass was suspended just over a basin of mercury. When a slight motion caused the tip of the cone to touch the mercury, an electric circuit was completed, which caused a clock to stop, indicating the time of the shock. The spiral spring was constructed so that thermal changes in the length of the spring were balanced by thermal changes in the length of the frame to which the spring was attached.
Horizontal motion was detected with common pendulums, whose swinging completed the same circuit as that completed by the mass-spring seismoscope. In addition, U-tubes filled with mercury were used to detect horizontal motion.
The closing of the above-mentioned electric circuit, besides stopping the clock, started a paper recording surface and caused a pencil to be pressed against the surface. The recorder, once started, continued running until the paper was used up. Every time the circuit was completed, a pencil dash would be left on the moving paper. The duration of the quake was thereby recorded. The size of the earthquake was indicated by the amplitude of oscillations suffered by a mass on a spring and by the amplitudes of the oscillations of the mercury in the U-tubes. The size of the earthquake was measured in "degrees".
Palmieri's "sismografo" seems to have been an effective earthquake detector for its time. Palmieri used it for many years on Mount Vesuvius and detected numerous shocks with the instrument (Palmieri, 1862a, 1862b, 1864, 1866, 1867, 1869, 1870, 1876). Disturbingly, however, the instrument was unable to detect many shocks which were felt in the nearby city of Naples. Palmieri, in fact, believed that the apparatus functioned better as a predictor of earthquakes and volcanic eruptions. He observed that many instances before the eruption of Vesuvius or other Mediterranean volcanoes, or before large earthquakes in the Mediterranean area, his seismoscope would detect "shocks". But when the earthquakes occurred, even if they were felt in Naples, the instrument would not detect them. (Fortunately, an identical instrument located in Naples did detect the earthquakes felt there.) Palmieri observed that before Vesuvius was going to erupt, the "shocks are more frequent; or to express it better, the ground trembles in a continuous manner with diverse phases" (Palmieri, 1867).
Palmieri's "sismografo" was later used by seismologists in Japan. For ten years it was used to detect earthquakes in Tokyo; 565 earthquakes were detected from October, 1875 to March, 1885 (Milne, 1880c, 1883b, 1885c). For most of these earthquakes, "force" (the size of the earthquake in "degrees") and direction of motion, as well as time, are catalogued, indicating that the whole "sismografo" was functioning. It should be noted that some workers in Japan did not believe the "force" to be necessarily even an approximate indication of the relative "intensity" of different earthquakes (see, for example, Ewing, 1883a, p. 72).
After 1885, routine earthquake recording in Tokyo was taken over by the new seismographs just developed in Japan, but Palmieri's circuit-closing seismoscopes were used past the turn of the century as triggering devices to start recording systems in other seismographs (Holden, 1898). One such seismoscope was among the seismographic equipment at Mount Hamilton, California, at the time of the California earthquake of April 18, 1906. The seismoscope did not trigger the other seismographs until thirty-three seconds after the first tremors were felt at Mount Hamilton (Read, 1910, p. 64).
The horizontal pendulum appears to have been independently invented several times in the nineteenth century (Darwin, 1882; Davison, 1896). In 1869, Zöllner described a horizontal pendulum with the suspension which has since been associated with his name (Zöllner, 1869, 1872). Zöllner's suspension is shown in Figure 5. The rod R, with a mass on one end, rotates about the axis AC, which is inclined at an angle i to the vertical, V. The rod is supported by wires AB and CD, which are attached to the rod at points B and D some distance from each other. A mirror on the pendulum was used to reflect a light beam from a lamp to a scale, where the motion of the pendulum, as magnified by the optical lever, was directly observed. The instrument was installed in the cellar of the university in Leipzig; Zöller could detect significant movement of the pendulum due to the filling up of the auditorium on the second floor of the building. The pendulum was built in order to observe changes in the direction of gravity due to tidal forces, but Zöllner suggested that it might also be valuable as a seismometer.
Horizontal pendulums were to be widely used in seismographs after 1880, because they could be given long periods and could still be compact. There were several different suspensions used in these later horizontal-pendulum instruments. The Zöllner suspension was used in the Galitzin horizontal seismograph. The suspension of the Wood-Anderson torsion seismometer may be considered a limiting case of the Zöllner suspension.
Further Studies with Seismoscopes
The research begun by Cavalleri and Palmieri was vigorously continued by Italian seismologists in the 1870's. 1874 saw the publication of the first journal devoted to solid-earth geophysics, the Bulletino del Vulcanismo Italiano, founded and edited by M. S. De Rossi. In spite of the high seismological activity, however, relatively few instrumental advances emerged from this period, and the instrument which to us is most significant seems to have been little noticed at the time it was invented. This was Cecchi's seismograph, which we will describe in the next paragraphs. The great majority of the other instruments designed by Italian seismologists at this time were seismoscopes of the same general type as had been invented earlier by Palmieri.
Cecchi's instrument has been described by later Italian seismologists as the first true seismograph (Agamennone, 1906, p. 91). The machine was apparently built in 1875 (Cecchi, 1876). Unlike any of the instruments we have discussed so far, the Cecchi seismograph was expected to record the relative motion of a pendulum and the Earth as a function of time. For horizontal vibrations, two common pendulums were used, one vibrating in a north-south plane and the other vibrating in an east-west plane. The pendulums "beat seconds"; their motion was magnified three times by a thread-and-pulley apparatus. For vertical motions, a mass on a spiral spring was used. Finally, a machine which was expected to record rotary motions, was incorporated into the seismograph. This consisted of a cross bar with weights at both ends, much like a dumbbell, which was pivoted at its center of mass so as to rotate in a horizontal plane. Restoring force was applied to the dumbbell by springs, so that it oscillated with a period of one second.
Cecchi arranged a seismoscope to start a clock and to start into motion the recording surface at the time of an earthquake. The recording surface would translate under the indicating needles at a speed of one centimeter-per-second for twenty seconds. From the time on the clock, an observer arriving at the seismograph would determine how long before his arrival the earthquake had occurred.
Unfortunately, the subsequent history of Cecchi's earliest seismograph is unclear. A modified form of the instrument was reported to have been installed in Manila (Du Bois, 1885). This instrument and the later Cecchi seismographs reported by Agamennone (1906) are not so interesting to us because, by the time these instruments were built, better seismographs were being used by British scientists in Japan. The early form of the Cecchi instrument was apparently installed in several observatories. One might think that one of these seismographs would have recorded an earthquake in the five years between 1875 and 1880, the latter being the year of the earliest seismogram obtained by the British in Japan, who also claimed the first real seismograph. But the earliest date we have found for a seismogram obtained with the early Cecchi instrument is February 23, 1887, when one of these seismographs recorded a large earthquake which occurred in the French-Italian border region (Denza, 1887). In that earthquake, only the east-west component was recorded, although the seismograph was located in a zone of strong shaking. The instrument must have been most insensitive. The seismogram is reproduced in Figure 6. The record appears to us to be as accurate a representation of earth movement as was obtained by the early seismographs in Japan. Assuming that the recording instrument had not been significantly altered between 1875 and 1887, it would seem that Cecchi indeed deserves credit for the construction of the earliest seismograph, insensitive though it might have been.
Cecchi's seismograph had relatively little impact upon Italian seismology. The insensitivity of the instrument must have discouraged others from building seismographic devices (De Rossi, 1887). In addition, Cecchi's apparatus would have been costly and unsuitable for an observatory of modest means. Finally, many Italian seismologists seemed to believe that an earthquake could be satisfactorily described by seismoscopic data (De Rossi, 1877, p. 9). We won't discuss in detail any more of the Italian seismoscopes. Descriptions of many are given by Agamennone (1906) and Ehlert (1897a). A review in English of the Italian instruments was given in The Electrical World (anon., 1887). Some of these seismoscopes depended on the fall of a delicately-balanced object to trip a time-recording device and sound an alarm. Many were modifications of Palmieri's seismoscopes. The microphone was used by some Italian seismologists to listen to "earth noises" (De Rossi, 1883).
An example of the use of seismoscopes in Europe is the experiment of von Lasaulx (Hoernes, 1893). He constructed an apparatus in which the fall of a poised weight caused a pendulum clock to be stopped. About one hundred and fifty of these devices were installed at telegraph stations in Germany. The sensitivity of the installed seismoscopes was deliberately kept low, so that human disturbances would not cause the clocks to be stopped frequently. Nevertheless, two earthquakes were large enough to be detected by many of the seismoscopes. Time and "direction of motion" were determined from each instrument. The data were contradictory and seemed only to indicate that most of the clocks at the telegraph stations were not sufficiently accurate for seismological work.
The Development of the Seismograph in Japan
Cecchi's seismograph notwithstanding, it seems clear to us that the credit for the introduction of the seismograph as an essential tool in seismology belongs to a group of British professors teaching in Japan in the late nineteenth century. These scientists obtained the first known records of ground motion as a function of time. Furthermore, they knew what such records could reveal about the nature of earthquake motion. They used their instruments to study the propagation of seismic waves, and they used them to study, for engineering purposes, the behavior of the ground in earthquakes.
The principal figure among the British seismologists in Japan was John Milne. It has been noted (Davison, 1927) that Milne's influence on seismology extends far beyond his own contributions, which were themselves considerable. The Seismological Society of Japan was founded at Milne's urging, in the spring of l880, following a sharp earthquake in Yokahama. The society was the first devoted to seismology; its founding marked the beginning of a period of rapid growth of seismology in Japan. Nearly two decades later, Milne was to be largely responsible for having similar seismographs set up at stations throughout the world, in order to collect data which could be evaluated at a central observatory. Milne's own investigations were rather more observational than theoretical. Although Milne devised several significant instruments, his primary importance to this paper is in the use to which he put both his own and others' instruments.
We will frequently cite the work of James Ewing and Thomas Gray, who designed the most important of the early instruments, in the years immediately following the founding of the society. Unfortunately, their stay in Japan was short; Gray left in 1881 and Ewing in 1883 (Davison, 1927). It was left largely to Milne to show the value to seismology of the Gray and Ewing seismographs. All three, Milne, Ewing and Gray, were visiting professors at the Imperial College of Engineering in Tokyo. The membership lists of the Seismological Society of Japan, in fact, reveal a greater number of foreign members than Japanese members (Seismological Society of Japan, 1880), and the instrumental innovations of the 1880's were due almost entirely to the visiting British professors.
In the decade preceding 1880, several instruments were constructed in Japan which deserve consideration although they did not function successfully as seismographs. Verbeck made the first pendulum observations of earthquakes in Japan in 1873 (Milne, 1880a). Wagener (1880) constructed a common-pendulum seismometer which successfully detected earthquakes, but apparently it did not write records.
Wagener's machine is shown in Figure 7. The motion of the pendulum bob M was magnified by a mechanical lever, T. The fulcrum B of the lever was attached to the ground, while the short arm of the lever was attached to the base of the pendulum bob. The displacement of the bob relative to the ground was magnified twenty-four times at the end C of the long arm of the lever. To this end of the lever was attached a piece of thread, which was, in turn, wrapped around a spool R. As the lever moved, the thread pulled off the spool, thereby turning the spool. An indicating needle, I, turned with the spool to indicate the relative size of the quake. The pulling of the thread also stopped a clock, thus giving the time of the earthquake. Wagener also built an apparatus which determined the azimuth of the earthquake motion and the amplitude of vertical motion.
In a seventeen-month period, in 1878, 1879 and 1880, in which Wagener's instrument was in operation, it detected twenty-seven earthquakes. The instrument seems to have been set up in the vicinity of Tokyo Bay (Wagener, 1880). Most of the recorded earthquakes were shown to have maximum ground-displacements of less than a millimeter, although two were indicated to have had a displacement greater than 2.5 millimeters. The observer reported that "the extent of the motion as given by the indicator has always been in perfect accordance with the violence of the shock, as far as this can be estimated by the feeling" (Wagener, 1880, p. 71). The vertical motion instrument detected vertical displacement in only eight of the twenty-seven events.
Wagener planned to record the motion of the indicator needle continuously on a translating, rotating drum. He does not appear to have carried out this part of his plan (Ewing, 1883a, p. 38). As it was constructed, then, Wagener's machine still did not constitute a seismograph. It did not write a record, but only indicated the maximum horizontal shaking.
W. S. Chaplin constructed a horizontal-pendulum seismometer in Japan in 1878 (Ewing, 1883a, p. 21). James Ewing described it as a "wooden rod, free to turn about a vertical axis, and carrying at its end a rigidly attached block". The instrument did not work, a failure which Ewing attributed to either low magnification or excessive friction at the pivot points. Chaplin's instrument is important as the first attempt to build a seismometer with a horizontal pendulum as a sensing element.
A most interesting and important paper, entitled "On a neglected Principle that may be employed in Earthquake Measurements" was presented in 1877 to the Asiatic Society of Japan by J. Perry and W. E. Ayrton (1879). The authors analyzed the motion of damped and undamped mass-spring oscillators subjected to a periodic force. The relative displacement of the oscillator mass and the ground is expressible as a sum of steady-state terms and transient terms. To minimize the effect of the transient terms, Perry and Ayrton recommended using an oscillator with a period much shorter than the periods expected in an earthquake. That is, they recommended an accelerometer for the most accurate recording of earthquakes. They recognized that the relative displacement of the mass and the earth, with such an instrument, would be less than the actual displacement of the Earth, but they don't seem to have thought that this would prevent the apparatus from obtaining useable records. Perry and Ayrton also considered oscillators with periods greater than or equal to the periods of earthquake motion. They pointed out that these oscillators, when damped with viscous material, could also be used to obtain reasonably accurate records of earthquake motion.
Perry and Ayrton designed an instrument to have their recommended short period. It was to consist of a heavy spherical weight, free to move horizontally and vertically, and held in equilibrium by five springs. The motion of the ball was to be resolved into three rectilinear components and written on a moving band of paper. This seismograph was never built. James Ewing (1883a, p. 69-70) criticized the design of the instrument on account of the probable difficulty of its construction. Ewing concluded, "... it is not remarkable that the principle on which it is based should, even after attention was directed to it, have remained neglected."
In rejecting Perry and Ayrton's proposed short-period instrument, contemporary seismologists seem also to have rejected the suggestion that the records of longer-period seismometers would be more accurate representations of the Earth's motions if these seismometers were damped with a viscous fluid. The authors had recommended the use of material of high viscosity, such as a mixture of tar and pitch. Perhaps this suggestion hindered acceptance of their proposal. We shall see that artificial solid friction was tried as a means of damping a seismometer. Not until the turn of the century was viscous damping introduced into seismology, with much success, by Wiechert.
It is time now to consider the work of John Milne, James Ewing, and Thomas Gray in developing the first successful seismographs in Japan. [An interesting series of letters by Milne, Gray, and Ewing in Nature (1886-1887) discusses the question of priority for the invention of certain of these seismographs. It would appear that very few of the instruments can be considered the invention of one of the men exclusively.]
Ewing's first seismograph (Figure 8) used a twenty-one foot long common pendulum as a sensing element (Ewing, 1880a). Ewing anticipated that the pendulum's five-second period would be sufficiently long that the bob would remain stationary under the short pulse-like motions of the ground which he believed occurred in earthquakes. He took care to build a rigid frame for the pendulum, so that the motion of the frame would not contribute spurious oscillations on the record.
The relative motion of the pendulum bob and the ground was magnified six times and recorded on a continuously-revolving, circular smoked-glass plate. The magnification was achieved with a simple lever whose fulcrum was attached to the ground. The short arm of the lever was attached to the pendulum bob and the long arm was the indicating lever, scratching a trace on the smoked-glass plate. Expecting that force due to the friction of the indicating lever would be transmitted back to the bob, Ewing attached the lever to the center of mass of the bob, so that this frictional force would not exert a torque on the bob and cause the bob to rotate or wobble. The motion of the pendulum bob could be resolved into two perpendicular components by the recording apparatus.
Ewing's common-pendulum seismograph was constructed in 1879. This seismograph was not operated continuously from its birth. It therefore did not record its first earthquake until over a year later. At that time, a more sophisticated instrument, Ewing's horizontal-pendulum seismograph, was also in operation. The long common pendulum thus did not have a major influence in the development of seismology by the British in Japan. As we shall see, however, very long common pendulums were later built by Italian seismologists, and these played a significant role in the history of seismology.
Ewing's was the first successful attempt to use a horizontal pendulum to detect earthquakes (Ewing, 1880b, 1881c). Ewing's suspension is illustrated in Figure 9. A light rigid frame F is pivoted at points A and B so as to swing like a garden gate around the axis of rotation AB. At the axis of percussion of the frame is pivoted the cylindrical mass M. [The mass was pivoted on a light frame in order to obtain the maximum inertia for a given total mass and a given distance of the axis of percussion from the axis of rotation (Ewing, 1883a, p. 17). Milne (1898a, p. 138) also pivoted the masses of some of his horizontal pendulums.]
The motion of the horizontal pendulum was magnified by means of a long indicator fastened to the frame of the pendulum. A record was inscribed on a revolving smoked-glass plate (Figure 10). There was no way to separate the signal written in one revolution from the signal written in another revolution. It was expected that the indicator would trace and retrace over the same circle on the revolving record during periods of quiet and, during an earthquake, would yield a signal superimposed on the circle. In practice, because the zero-line drifted, later versions of the instrument used a seismoscope, such as the one invented by Palmieri, to start the recording surface into motion at the time of an earthquake. In some instruments, a short pendulum was released in an earthquake to put time marks on the record. Otherwise, the relative arrival times of different phases were determined from the known speed of the recording surface.
With few exceptions, the seismographs built by the British in Japan were intended to have periods longer than the periods of the waves occurring in earthquakes, so that the seismographs would function as displacement recorders. In order to test the accuracy of his horizontal-pendulum seismograph as a displacement recorder, Ewing subjected it to a "shake-table" test (Ewing 1881c, 1883a, p. 86). Two identical instruments were placed side by side on a table, the bob of one being clamped to a nearby wall, so that it would not move, and the bob of the other being left free. The table was then shaken. It was found that the records written by both instruments were nearly identical (Figure 11), showing that the bob of the unclamped seismograph had remained nearly stationary during the shaking. The "frequency" of the shaking motion was not reported.
Both of Ewing's instruments, the common-pendulum and horizontal-pendulum seismographs, recorded a small earthquake on November 3, 1880, giving the first lengthy seismograph records of earthquake motion as a function of time. [Milne (1880b) obtained a short seismogram, three seconds in length, of the Yokohama earthquake of February 22, 1880. He recorded the motion of a long common pendulum on a moving plate.] Assuming that the seismometer functioned as a displacement meter, and assuming harmonic motion, Ewing calculated the maximum displacement (0.29 mm.) and maximum acceleration (1.6 cm/sec-sec) of the ground (Ewing, 1881a, 1883a, p. 54-55).
In his report on this and four other small earthquakes recorded in the same month, Ewing noted the most striking features of these early seismograms. They were: "(1) The very gradual beginning and ending of the disturbance. In none of the observations did the maximum motion occur until after several complete oscillations had taken place. (2) The irregularity of the motion. The successive undulations are widely different both in extent and in periodic time. (3) The large number of undulations in a single earthquake, and the continuous character of the shock. (4) The extreme minuteness of the motion at the Earth's surface" (Ewing, 1883a, p. 55). The importance of these observations can be imagined. For the first time, scientists had a representation of earthquake motion, and this representation revealed a much different manner of shaking than that which had been previously thought probable. Specifically, Robert Mallet's widely accepted view that an earthquake consisted primarily of a longitudinal pulse was shown to be incorrect. Ewing (1881b) realized that his observations were fatal to methods of determining the "velocity of the earthquake" from the times shown on stopped clocks (as had been attempted by von Lasaulx, cited above). For the first time, also, seismologists could design their instruments with some knowledge of the phenomena the instruments were to record.
A seismograph for recording vertical motion was still to be desired. Thomas Gray (1882) introduced a method of increasing the period of a mass-spring system by attaching the spiral spring to the short arm of a lever and attaching the mass to the long arm of the lever. This increased the period by increasing the effective mass of the pendulum bob. It was, however, desirable to diminish further the tendency of the mass to return to its zero position. Accordingly, Gray attached to the bob a container which was connected by a siphon to an external reservoir of mercury. When the bob was deflected downward, mercury would flow from the reservoir into the container on the bob, thus increasing the weight of the bob and neutralizing the increased restoring force of the spring. When the bob was deflected upward, mercury flowed from the container to the external reservoir, lightening the bob and, again, neutralizing the tendency of the bob to return to its equilibrium position.
James Ewing (1882a) suggested that the period of Gray's seismometer could also be increased by attaching the spring to the lever arm at a point below the line connecting the center of mass of the pendulum and the pivot of the lever (Figure 12). This gives the moment arm, to which the spring is applied, a first-order dependence on the boom deflection, with the moment arm always changing so as to decrease the restoring moment of the pendulum. This particular suspension was adopted in Japan, and was to see widespread use in other vertical-motion instruments before the introduction of the zero-length spring. Gray (1887b) and Grablovitz (1891, 1896a) introduced other suspensions which also had the effect of decreasing the restoring moment acting on the lever, when the lever was displaced.
The changing length of the spring in the Gray-Ewing vertical seismometer caused considerable drift. In the 1882 instrument, the seismometer recorded on a revolving glass plate which, because of the drift, was not run continuously. A Palmieri-type seismoscope was used to put the recording surface into motion in an earthquake.
James Ewing, in 1882, joined a common pendulum with an inverted pendulum, so that the two would move horizontally together (Ewing, 1883b, 1886). He obtained thus a system in nearly neutral equilibrium, with the unstable tendency of the inverted pendulum lessening the stability of the common pendulum to which it was attached. This was Ewing's "duplex-pendulum" seismometer (Figure 13).
The duplex-pendulum seismometer is of particular interest to us because in 1887 and 1888 this type of seismometer was placed at ten sites in Northern California and Nevada (Louderback, 1942). The first seismographic observatories in the Western Hemisphere, at Berkeley and Mount Hamilton, were equipped with the duplex instruments as well as Ewing horizontal-pendulum seismometers and Gray-Ewing vertical seismometers. The duplex seismometers in use here wrote two-dimensional particle-motion diagrams on a stationary, smoked glass plate.
We must introduce here yet another form of the horizontal pendulum, the so-called "conical pendulum", invented by Gerard in 1851 (Gerard, 1853; Davison, 1896), and introduced to seismology by Thomas Gray (1881). In this suspension, the nearly horizontal boom is held up by a flexible wire and pivots about the axis of rotation on a bearing joint. In order to lessen the friction at the pivot point, James Ewing (1883a, p. 27) forked the boom and extended it beyond the axis of rotation (Figure 14). From the end of the fork, Ewing had a flat steel spring coming back to the axis of rotation and serving as the joint. The spring was held in tension by the boom; the only friction occurred internally within the flat spring. This type of joint has been widely used ever since.
A complete summary and discussion of the instruments invented in Japan prior to 1883 was given by Ewing (1883a). At that time, unfortunately, the period of an instrument was not considered too important, except that it was usually intended to be greater then the period of the waves the seismograph was to record. Ewing writes, "When registering on a continuously moving plate, a well-constructed and well-adjusted seismograph should make one complete oscillation in about 5 seconds, and its decrement of amplitude should not exceed about 1 mm. per oscillation" (Ewing, 1883a, p. 78). Although Ewing's damping specification is vague, it suggests that an undamped system was considered most desireable. In fact, we have seen that Perry and Ayrton suggested the use of viscous damping, from theoretical considerations. Gray (1881) and Milne (1881a) successfully used pendulum seismometers which were intentionally heavily damped with solid friction. Ewing (1883a) pointed out that the use of solid friction would mean that there would be a minimum recordable acceleration, below which earthquakes would not record at all.
The use of viscous damping does not seem to have been attempted by the British in Japan. In fields other than seismology, viscous damping had been used to suppress high frequency tremors of pendulums so that the longer period motions could be studied (Rood, 1875; Darwin, 1882). In particular, the attempts of the Darwins (1882) to measure, with a damped pendulum apparatus, the lunar disturbance of gravity, were well known to the British in Japan. But viscous damping was not introduced into seismology until much later.
With the seismometers of Gray and Ewing available, seismologists in Japan were able to make important advances in the understanding of earthquake motion. John Milne, especially, made extensive use of the new instruments.
Milne and his colleagues conducted experiments on the propagation of elastic waves from artificial sources (Milne and Gray, 1883; Milne, 1885b). The most revealing records are those of dynamite explosions recorded on moving glass plates by Ewing horizontal-pendulum seismometers and Gray-Ewing vertical seismometers (Figure 15). The moving plates were started into motion shortly before an explosion. Time signals were put on the plates. The records showed the normal motion outracing the transverse, and a slight vertical motion outracing them both. The apparent velocity of the wave of vertical motion was 500 feet per second. The maximum frequency of a disturbance was found to decrease with distance. In evaluating these observations today, it must be understood that the static magnification of the instrument was very low (four or six); early arrivals may not have been recorded. Also, the stations were close to the source (the furthest was 400 feet away), so that inaccurate timing would grossly affect transit velocities. Milne clearly believed that the normal and transverse waves were compressional and distortional body waves, respectively. He thought the vertical displacement was due to "free surface waves" (Milne, 1885b, p. 81). [A number of investigators had written of seismic "surface waves" before Rayleigh (1885) demonstrated mathematically the possibility of surface waves on an elastic medium. The idea of surface waves must have been suggested to earlier scientists by the observation of "waves" on the surface of the ground in an earthquake. J. Le Conte (1882) spoke of "surface waves", but meant the surface projection of body waves. Mallet (1862b, vol. 2, p. 300) envisioned true surface waves, set up by a compressional wave impinging on the surface above the focus of the earthquake, and propagating with velocities which were probably greater than the compressional wave velocity. Mallet's waves were transverse in a vertical plane. It seems likely that Milne thought he was observing the surface waves hypothesized by Mallet.]
Milne placed a number of similar seismometers at different locations to test the effect of topography and geology on earthquake motion (Ewing, 1882b, Milne, 1886a, 1887a). It had long been observed that damage to structures seemed to depend on the "ground" on which they were built (see, for example, Dolomieu (1784) on the Calabrian earthquakes of 1783). Milne found that the amplitude of seismic waves recorded on similar seismometers also depended on the nature of the ground in their immediate vicinities. In "moderately strong" earthquakes, the recorded amplitudes were generally "very much greater" on "soft ground" than on "hard ground" (Milne, 1887a, p. 30-31). For "very small" earthquakes, this was not true. "Soft ground" in Milne's experiment was marshy land where the water-table was a few feet from the surface. "Hard ground" was higher land where the water-table was at least ten feet from the surface. The recording sites used by Milne were separated by several hundred to a thousand feet horizontally, with a maximum difference in elevation of twenty feet. It is worth noting that all the records were started into motion simultaneously by a seismoscope, so that the seismographs should have recorded the same phases. On the other hand, none of the instruments recorded the earliest phases, and there is no way of knowing when in an earthquake they did start recording. In one of the early experiments of this sort, Milne tested the similarity of the seismographs he used by placing them side by side and recording with them simultaneously. He observed that "they practically gave similar diagrams" (Milne, 1884b).
Milne performed a similar experiment in different types of building construction and on different floors of the same building (Milne, 1888d). He compared the motion in a brick two-story house and a wood two-story house, situated sixty feet apart on "similar ground". Seismographs were placed on the two floors "vertically above each other and as nearly as possible in similar positions" (Milne, 1888d, p. 67). Milne found that the wood house moved more than the brick house, and the upstairs of each moved more than the downstairs.
In 1882, Milne became concerned with the possibility that neighboring points of ground might move relative to each other in an earthquake. The presence of large strains would pose engineering problems, as well as render seismograph recordings less significant. He constructed an instrument to measure the relative motion of two neighboring points of ground, i.e., a strain seismometer (Milne, 1885b, 1888c). The instrument is shown in Figure 16. Two posts A and O were driven into the ground three feet apart. A rigid beam R was extended from one of the posts almost to the other post. The motion of the end of the beam with respect to the other post, hopefully the same as the relative motion of the two posts, was magnified six times by means of a simple lever B and the record written on a smoked glass plate C. In the earliest form of this seismometer, used in 1882, unusually large amplitudes were obtained (Milne, 1885b), which suggested to Milne that the beam was moving independently of the post to which it was attached. The apparatus was apparently then improved so that Milne felt such motion of the beam would be unlikely. Relative motion of several millimeters was obtained for some local earthquakes recorded by the system.
Before leaving the strain seismometer, we mention another such instrument, built in 1900 by E. Oddone (Oddone, 1900). Oddone was attempting to construct a seismological apparatus which did not depend on a pendulum for a sensing element, because of the inaccuracies introduced by pendulum eigen-oscillations. His instrument, shown in Figure 17, was similar to Milne's strain seismometer, with a long, rigid beam attached to one pier at A and extending almost to a second, neighboring pier. A "piston" was attached to the end of the beam so as to slide in the "large cylinder", B, of a hydrostatic press which was mounted on the second pier. A small displacement of the piston in the large cylinder, equal to the relative motion between the two piers, caused a 3600 times larger displacement of the water in the "small cylinder" of the press, C. Oddone encountered difficulty in recording the displacement of the water in the small cylinder, however. He mentioned only one earthquake recorded with his instrument.
Milne stayed in Japan until 1895. In 1892, the Seismological Society of Japan ceased to exist due to a lack of interested members (Milne, 1893a). The "Transactions" of the society was continued as the Seismological Journal of Japan, which was edited by Milne and was published until 1895, the year Milne left Japan. Seismology in Japan was carried on by Japanese seismologists, of whom Fusakichi Omori made particularly important contributions in the decade after Milne left. When Milne returned to England, he began important work in the systematic registration of large distant earthquakes. We will meet him again later.
The Seismograph Becomes an International Instrument
News of the successes of the British in Japan began to affect European seismology in the middle 1880's. It did not take long for most European seismologists to appreciate the advantages of the British instruments and begin to improve on them. In 1886, E. Brassart of Rome constructed common-pendulum seismographs after studying the seismographs made in Japan (Brassart, 1886; Agamennone, 1906, p. 94). The motion of a meter-long pendulum was resolved into perpendicular components and traced on smoked paper which was mounted on a cylinder. This instrument and modifications introduced later by Brassart and Agamennone (Ehlert, 1897a, p. 434; Agamennone, 1906) were used rather widely in Italy.
A most dramatic increase of seismological activity in Europe followed the confirmation in 1889 that waves from large earthquakes could be detected by sensitive instruments located halfway around the world from the earthquakes' epicenters. We have studied, so far, only seismographs intended to record local earthquakes. For many years, however, there had been indications that the vibrations from large earthquakes traveled far from the regions where the earthquakes were felt, causing otherwise inexplicable disturbances on delicate instruments, such as astronomical levels and magnetometers (Baratta, 1895, 1897; Darwin, 1882; Fouqué, 1888b). Some observers had attempted to calculate the amplitude and/or the propagation velocity of the disturbances affecting their instruments, under the assumption that these disturbances originated from certain earthquakes (Oriani, 1783; Nyren, 1878; Fouqué, 1888b).
The first known recordings of a distant earthquake, which were identified as such, were made in 1889, also with astronomical instruments (Figure 18) (von Rebeur-Paschwitz, 1889). The instruments were horizontal pendulums, designed by Ernst von Rebeur-Paschwitz to measure slight changes in the direction of the vertical. Two of these pendulums, located in Potsdam and Wilhelmshaven, recorded a large earthquake on April 17, 1889. The earthquake had been felt in Japan about an hour before it was recorded in Germany.
Von Rebeur's pendulum was of the form used earlier by Ewing in his horizontal-pendulum seismometer (von Rebeur-Paschwitz, 1894). It is shown in Figure 19. The instrument consisted of a rigid frame, rotating about two bearings A and B, each consisting of a point pressing into a socket. To the frame was attached a mirror M, which reflected light from a lamp, through a cylindrical lens, to a rotating drum which was covered with photographic paper. The drum turned 11 millimeters in an hour. Von Rebeur's pendulum was only 10 centimeters long, and carried a mass of only 42 grams. It was usually used with a period of from 12 to 17 seconds and a static magnification of 100 (Ehlert, 1897a, p. 404-407). Time was obtained with a second fixed light trace which wrote on the same photographic paper. Every hour, this second trace was eclipsed for five minutes.
Von Rebeur was the first to use a photographically-recording instrument for continuous seismological observations. [Fouqué and Levy (1888) measured propagation velocities of explosion-generated waves by using a modification of Mallet's seismoscope in which a ray of light was reflected off of a surface of mercury onto a moving photographic plate. The plate was started into motion shortly before the explosive was detonated. Earlier, earthquakes had sometimes been registered on photographically-recording magnetographs (Fouqué, 1888b).] The advantage of photographic recording was the complete absence of friction in magnifying and recording the relative motion of the pendulum and the Earth. The only sources of friction in von Rebeur's apparatus were the points where the pendulum arm was pivoted. The effect of this friction on the dynamic behavior of the pendulum was independent of the magnification of the instrument. In contrast, with mechanical registration, the friction between the indicator and the recording surface exerts a greater force on the pendulum according as the mechanical magnification increases. With mechanical registration, there exists a limit of magnification, above which the inertia of the pendulum cannot overcome the frictional forces between the indicator and the recording surface.
There were, however, disadvantages to photographic registration as compared with mechanical registration. Photographic records weren't as sharp as smoked paper records. Rapid, high amplitude oscillations did not record on photographic paper. The photographic paper was expensive. And, because of expensive paper, many investigators recorded at such slow speeds that accurate timing and detailed studies of the recorded waveforms were impossible. Mechanical registration thus continued to be widely used in seismographs. We shall find, in fact, that by using heavy masses and reducing friction to a minimum, mechanically recording seismographs were built which rivaled the photographically recording instruments in sensitivity.
Von Rebeur kept careful records of "earth-tremblings" recorded by his pendulums for several years, through a period of an illness of which he died in 1895, at the age of thirty-four (von Rebeur-Paschwitz, 1895a; Davison, 1927). In 1892 and 1893, he had instruments set up in Strassburg and Nicolajew, 1800 kilometers apart. About half of the disturbances on his pendulums were recorded at both sites. At each location, only one pendulum was used. After von Rebeur's death, his instrument was modified by Ehlert (1897a, p. 406, 1897b), who increased the recording speed of the instrument and increased its weight, to make the pendulum less susceptible to movement by air currents.
Contemporaneously with the development of the horizontal pendulum seismometers in Germany, some Italian seismologists extensively developed the long common-pendulum seismometer. G. Agamennone and A. Cancani made particularly important improvements in this type of seismometer. They were aware of the work being done in Germany, but they considered the common pendulum superior to the light horizontal pendulum for purely seismological research. At this time, Agamennone believed the long common pendulum to remain nearly stationary for short-period oscillations, in contrast to the German light horizontal pendulums which he did not think would remain stationary under rapid vibrations of the ground (Agamennone, 1894). Most of the Italian seismographs used mechanical registration.
The first of the long common-pendulum seismographs was constructed by Agamennone (1893). It was designed as an improvement on a 1.5 meter long, 10 kilogram, Brassart-type seismograph (Agamennone, 1894). The smaller instrument had too slow a recording speed, so that individual oscillations could not be resolved in the seismograms. In addition, the mass was so light it couldn't overcome the friction of the writing stylus. It would remain displaced from the zero line after being disturbed These problems were both corrected in the new seismograph. It had a length of 6 meters and carried a mass of 75 kilograms. The success of this instrument prompted Agamennone to build a still larger common pendulum. In 1894, a 16 meter long pendulum, with a mass of 200 kilograms, was constructed (Agamennone, 1894). A similar instrument built at Catania had a length of over 25 meters (Milne, 1899, p. 259). Almost all of the common-pendulum seismometers employed a device to resolve the ground motion into mutually-perpendicular components. The records were written with pen and ink on relatively rapidly moving surfaces (Milne, 1899).
The early Italian pendulums gave important records of large teleseisms. A glance at a teleseism recorded by a 7-meter long, common-pendulum seismometer of Cancani (Figure 20) shows that the two body-wave groups and the surface-wave train were fairly well recorded. These instruments, in fact, were the earliest to make such a separation of phases for teleseisms. Cancani proposed that the first two wave groups, corresponding to our P and S waves, both represented compressional waves, and the third, our surface waves, represented distortional waves (Cancani, 1893). In 1899, Oldham (1900) presented a thorough study of teleseismic waves, which concluded that the first wave group represented compressional waves, the second represented distortional waves, and the third represented surface waves. He relied heavily on data from the low-magnification Italian common-pendulum seismometers, believing the German horizontal-pendulum seismometers to be less trustworthy for his purposes.
Disappointingly, however, the sensitivity of these early, long, common-pendulum seismometers did not approach that of the German light horizontal pendulums. Friction limited the Italian instruments to static magnifications of ten or so.
In 1895, Vicentini and Pacher constructed the Vicentini "microsismografo", a mechanically-recording seismograph with a magnification nearly equal to that of the German machines (Pacher, 1897). The seismograph is shown in Figure 21. A 100 kilogram mass M was suspended in a 1.5 meter-long pendulum. The relative motion of the bob and the ground was first magnified by a mechanical lever L. The motion of this lever was resolved into perpendicular components at V and, in the process, the pendulum motion was magnified again. The total magnification was 80. The traces of the two horizontal components were written side by side on smoked paper, along with a time trace. In 1896, a large-scale version of the "microsismografo" was constructed, with a pendulum length of 10.68 meters and a bob of weight 400 kilograms (Pacher, 1897).
A vertical-component seismometer was later introduced by Vicentini and Pacher (1898). Rather than employing suspension with a spiral spring for restoring force, Vicentini and Pacher used a flat spring, clamped to the wall at one end and loaded with a weight at the other end. The instrument was clamped so that the loaded end of the flat spring, bent under the weight of the mass, was horizontal. As finally developed, the mass oscillated vertically with a fundamental period of 1.2 seconds. The vertical seismometer wrote with a static magnification of 130 on a smoked-paper record which was constantly in motion.
In 1895, John Milne left Japan and returned to England, where he established a seismological observatory on the Isle of Wight (Davison, 1927). He concentrated now on the study of unfelt earth movements, both microseisms and teleseisms. Milne made extensive use of a horizontal-pendulum seismograph which he designed in 1894, while he was still in Tokyo (Figure 22) (Milne, 1894b). The instrument recorded photographically. Instead of having light reflected onto photographic paper with a mirror fastened to the frame of the pendulum, Milne had light shine onto the paper through the intersection of two mutually-perpendicular slits. One of the slits was fastened to the pier. The other slit was fastened to the pendulum, and moved with the pendulum, thus causing the spot of light to move on the paper. Leveling screws in the base of the apparatus made possible a determination of the static tilt sensitivity of the pendulum by giving the base of the instrument a small known tilt and observing the resulting displacement of the trace. Static magnification may be calculated from an instrument with known period and known static tilt sensitivity. Milne's instruments usually had a period of about fifteen seconds and a static magnification of six.
Milne pressed for the establishment of a world-wide network of seismographic stations, with standard instruments (Milne, 1897). Milne's photographically-recording horizontal-pendulum seismograph was selected by a committee of the British Association for the Advancement of Science to be the standard instrument for such an undertaking. By 1900, similar Milne seismographs were established on all of the inhabited continents (Milne, 1901). [The desirability of having a station in the Antarctic region was also apparent at this time. In 1902, a Milne instrument was operated near the shore of the Ross Sea, at 77 degrees 50 minutes south latitude as part of the British national antarctic expedition of 1901-1904. The seismograph recorded over one hundred teleseisms in the period of months in which it was operated (Milne, 1905).] Sixteen stations were regularly sending records to Milne (Figure 23). Using data from the Milne seismographs, and published data from German and Italian observatories, Milne plotted travel-time curves for teleseisms with known epicenters. The first curve (Milne, 1898a) gave only the transit time of the phase of maximum amplitude, which, on seismograms made with the Milne seismograph, usually corresponded to our surface waves. A year later, the transit times of both the "preliminary tremors" and the phase of maximum amplitude were plotted (Milne, 1899). The transit times of the "second preliminary tremors" were plotted by Oldham (1900), who correctly inferred that the wave group was composed of transverse waves. Milne began systematic location of large teleseisms, using arrival times of the maximum phases, felt reports, and the time intervals between the arrival of preliminary tremors and the maximum phase (Milne, 1900b).
Italian seismologists began using horizontal-pendulum seismometers toward the end of the nineteenth century. In 1895, G. Grablovitz built a seismometer of the type earlier devised by Gray (above) - a horizontal pendulum pivoting on a single point and held up by a flexible wire (Grablovitz, 1896a). At first, Grablovitz used three horizontal pendulums, no two of them colinear, recording simultaneously at a single location. This was so that the direction of propagation could be determined from the amplitude of the recorded waves alone without knowledge of the phase of the wave for each component. This method of determining the direction of propagation assumes that the ground particles are known to vibrate either longitudinally or transversely: it still results in an ambiguity of 180 degrees for the direction of propagation. The method was required by the slow recording speed used by Grablovitz, which made it impossible to match up an individual oscillation from one component with an individual oscillation on another component. The simultaneous use of three horizontal components had been suggested by other authors (Ehlert, 1897a, p. 358, 403, 406). In a later version of his instrument, Grablovitz (1896b) increased the recording speed and used only two pendulums at right angles to each other. The improved version of Grablovitz's horizontal pendulum carried a mass of twelve kilograms. It had a static magnification of eight, and was used with a period of around seventeen seconds. A. Cancani built a larger horizontal-pendulum apparatus (Cancani, 1897). Cancani's seismometer used a suspension similar to that used by Ewing, with two bearing points. This seismometer wrote with pen and ink on a surface moving at the relatively rapid rate of sixty centimeters per hour. The period of the instrument was usually about twenty-four seconds. The Stiattesi horizontal pendulum, introduced in 1900, was a larger seismometer built on the same principle as the Cancani horizontal-pendulum seismometer (Agamennone, 1906, p. 115).
F. Omori, a pupil and colleague of Milne's, constructed horizontal-pendulum seismographs. As with the instrument of Grablovitz, each pendulum consisted of a mass on a rod, pivoting about a socket, with the mass held up by a flexible wire (Omori, 1899). The static magnifications of Omori's instruments were about ten, and they were given periods of about twenty seconds. These instruments were prototypes of the Bosch-Omori seismograph which was widely used throughout the world in the early twentieth century. The Bosch-Omori seismograph was built by the firm of J.A. Bosch, of Strassburg. In 1907, Bosch added damping to Omori's originally undamped seismometer (Sieberg, 1923, p. 442).
Early Studies of "Microseisms"
Virtually all of the early pendulum seismographs sometimes gave records of vibratory disturbances which lasted for hours and even days, and which seemed quite unrelated to earthquakes. We have alluded to the study of such small motions of pendulums in our paragraphs on Italian seismometry of the 1870's. It would be well to consider briefly the history of these investigations.
T. Bertelli (1873) has found studies of "spontaneous" pendulum motions as far back as 1643. He reports that the first investigators concluded that the motions were due to local or accidental causes, or were optical illusions. Bertelli began the first systematic observation of these motions in 1870 (De Rossi, 1877, p. 11). He noted a dependence of pendulum activity upon regional weather conditions, with greater activity occurring in winter and accompanying low-pressure zones. Bertelli believed that the pendulum motions were caused by tremors, from natural forces acting on a regional scale. This view was contested by a contemporary, P. Monte, who felt that the pendulum movements were due to local causes, such as air currents and cultural noise. De Rossi (1874b, 1875) has summarized the controversy between Bertelli and Monte. De Rossi undertook to explain the difference between the views of Bertelli and Monte, and he concluded that some of the motions were tectonic in origin (De Rossi, 1874a). He sensed a correlation between "tremor storms" and earthquakes. Largely at his urging, observatories were established in Italy to note the state of "endogenous activity", and the name "endogeneous meteorology" was applied to the study of the interior of the earth (De Rossi, 1883). The tremors at each station were observed with a "tromometer", consisting of a common pendulum whose motions were observed directly through a microscope. Daily maps were published showing tromometric activity throughout Italy. The project was abandoned, however, because of the difficulty of separating tremors due to tectonic forces from tremors due to air currents and traffic (Agamennone, 1906, p. 41).
Meanwhile, the "spontaneous pendulum movements" had attracted the interest of other scientists. The attempt of an English group to measure the lunar perturbation of gravity was thwarted because of the high level of background vibrations. Darwin (1882, 1883), who wrote the report of the group, has given a more complete history than we have been able to give of the early studies of spontaneous vibrations. Von Rebeur-Paschwitz (1894, 1895a) also carried out extensive studies of the motions exhibited by his horizontal pendulums.
John Milne began studies of "tremors" in 1879, in the hopes that earthquakes in Japan would be preceded by detectable noises, as the faults responsible for the earthquakes were preparing to break (Milne, 1882b). [The view that earthquakes originate from faults was referred to by Milne (1886b, p. 221) as the "ordinary supposition". De Rossi (1874a) had earlier hypothesized that waves were generated at the time of an earthquake by the lips of a "volcanic fracture" moving rapidly up and down with respect to each other. The Mino-Owari earthquake of October 28, 1891, with its spectacular faulting, helped convince Milne that faulting caused earthquakes by the release of strain energy which had been stored in rock through the slow deformation of the Earth's crust (Milne, 1898b, p 24-38). Another widely-held theory, suggested by Mallet (1862b) was that earthquakes were caused by water, rapidly vaporizing and condensing within the Earth. Milne used a microphone in his 1879 studies. His approach is similar to some used in today's renewed attack on earthquake prediction.] His views on the causes of "tremors" changed over two decades of study. In 1887, he suggested that the tremors were caused by wind and were propagated to areas where no wind was blowing (Milne, 1887b). In 1893, he altered his position, and held that tremors, or "earth pulsations", were caused by atmospheric pressure changes (Milne, 1893c). Milne did not specify whether the disturbances, once generated, propagated as elastic waves. He likened the pulsations to "the swells upon an ocean" (Milne, 1893c, p. 103-104). By 1898, however, Milne (1898b) had concluded that most spontaneous pendulum motions were caused by purely local phenomena, or were perhaps instrumental disturbances. The "tremors" studied by Milne had periods of several minutes. Milne gave convincing evidence that many were caused by small air currents around the instrument. Some were also thought to be due to the effect of climate on the soil outside the building in which the instrument was housed. For some disturbances, he had no sure explanation.
Milne (1898b) was drawn to investigate the so-called "diurnal wave", a daily drift of the position of pendulum bobs which had also been studied intensively by von Rebeur-Paschwitz (1894, 1895a). Milne believed, with von Rebeur, that the drift was associated with the passage of the sun across the sky. He did not determine a definite cause for the diurnal wave, although he suggested that it might result from unequal evaporation of moisture from the ground surrounding the instrument.
One wonders how many of the pre-1900 investigators were actually observing the background elastic-wave noise which we today call "microseisms". Most of the early seismographs were very insensitive by today's standards, and to be recorded, micro-seismic motion would have had to be very large. Some of the most convincing seconds of "microseisms" were obtained by Omori (1899). The periods of these disturbances were between four and eight seconds, whereas the periods of the recording instruments were twice as long. The records reproduced by Omori (Figure 24) resemble the records of "storm microseisms" which we obtain at Berkeley today. But the amplitudes of the displacements in the waves were as great as 0.2 millimeters, an order of magnitude higher than the maximum microseismic amplitudes one would expect for such periods at a noisy site (Brune and Oliver, 1959).
The Tilt Controversy
For a seismograph to be effective, its response characteristics must be known. We have seen that the British seismologists in Japan attempted to simplify the problem of the seismograph response by building relatively long-period instruments, and assuming that the seismogram trace was proportional to the ground displacement. The general problem of the response of a damped oscillatory system to ground motion of arbitrary period was considered theoretically by Perry and Ayrton (1879). Poincaré (1888) and Lippmann (1890) presented short notes on the integration of a seismogram trace to obtain ground displacement.
In the 1890's, however, the possibility arose that all of the theories of seismograph response just mentioned were fundamentally wrong. For these theories assumed that a seismograph pendulum responds to linear motion which is in the plane of oscillation of the pendulum and perpendicular to the line joining the pendulum's center-of-mass with the pendulum's axis-of-rotation. That is, a common pendulum which oscillated in an east-west plane was expected to respond to linear horizontal motions occurring in the east-west plane. The alternative theory, which became very widespread in the 1890's, was that horizontal and common pendulums were responding largely to tilting, which was in turn due to vertical displacements of the Earth's surface. As the Earth's surface tilted up and down, the pendulum would attempt always to point in the direction of gravity (or to point along the projection on the pendulum's plane-of-oscillation of the direction of gravity).
At first, the implications of recording tilting instead of displacements do not seem to have been understood among seismologists in Europe. We shall see, however, that calculated ground displacements commonly varied by several orders of magnitude according as the seismograph was assumed to be responding to horizontal displacements or to tilts due to vertical displacements. To be confident of any seismographic measurements of the amplitude of ground motion in an earthquake, it was necessary to determine the importance of tilting in earthquake motion.
An instrument for recording tilt in an earthquake was suggested as early as 1703 (De la Haute Feuille, 1703), but the idea that seismographs should record tilting in earthquakes was not widely accepted until European seismologists began recording teleseisms. Then, it was assumed without much argument, at first, that the recorded waves represented tilt, rather than horizontal motions (Ehlert, 1897a; Schlüter, 1903, p. 301-325). Perhaps this was because the earliest records of a teleseism, those of von Rebeur, were obtained with instruments which were built to measure changes in the direction of the vertical. Furthermore, the recorded motion, consisting of long-period sinusoidal oscillations, suggested a wave motion not unlike waves on the surface of the sea, which seemed to imply considerable tilting (Agamennone, 1894).
While the European seismologists were interpreting their first seismograms of teleseisms, John Milne, still in Japan, had independently concluded that tilting had a significant effect on the response of a seismograph in an earthquake. During the Mino-Owari earthquake of October 28, 1891, Milne (1893d) had observed horizontal-pendulum seismometers located at a distance of 140 miles from the epicenter and was convinced from watching the pendulums that the instruments were being tilted. A comparison of seismograms from different horizontal instruments suggested that record amplitudes were proportional to the static tilt sensitivities of the instruments rather than to their static displacement sensitivities. In order to obtain a more accurate measure of tilt, Milne (1893e) set up a beam balance, arranged so that the motion of the balance's vertical pointer was amplified and recorded on a smoked-glass plate. Milne believed that the beam would remain horizontal in an earthquake while the Earth tilted beneath it. The balance was in stable equilibrium, so that one would expect it to respond also to horizontal displacements of the ground, like any other pendulum. Nevertheless, Milne seemed to assume that the records given by the instrument represented only tilt. Significant "tilting" was recorded by the balance seismograph. Milne was forced to the "unpleasant conclusion ... that all the records hitherto published in Japan where vertical motion has been recorded are of but little value" (Milne, 1893e, p. 103-104).
Soon, however, the "tilting hypothesis" met objections. A major difficulty was the large vertical displacement required to produce a tilting of the magnitude which seismologists believed they were recording. Under the assumption that his seismographs were recording only tilt, Cancani (1894) calculated that the ground rose and fell forty centimeters during the passage of waves of sixteen-second period from a distant earthquake. The improbability of such large vertical motion occurring in the unfelt waves of a distant earthquake was emphasized by Schmidt (1896). The same record which Cancani thought represented tilting due to a vertical displacement of forty centimeters, Schmidt pointed out, could also represent a horizontal displacement of much smaller amplitude. (In this case, using Schmidt's formulas, the horizontal amplitude would be less than a millimeter.) Feeling that a horizontal displacement of a millimeter was more probable than a vertical displacement of forty centimeters, Schmidt concluded that the common and horizontal pendulums were indeed recording horizontal oscillations from teleseisms.
Schmidt's conclusion was not accepted by many seismologists, at first, and a controversy arose over the presence or absence of large tilts in earthquake waves. (Ehlert (1897a) summarizes the arguments which were used "for" and "against" tilting.) Although the large vertical displacements required to produce significant tilting were not perceptible to human beings, Ehlert (1897a) argued that the vertical displacements might still exist, but that their periods were too long to be noticed by humans. At this time, there were no long period vertical seismographs, and seismologists do not seem to have considered the possibilities of directly recording the vertical displacements believed to be responsible for tilting.
In 1899, W. Schlüter (1903) began recording in Göttingen with a tilt-measuring device, which he called a "klinograph". The instrument was similar to a beam balance, with the difference that the horizontal axis of rotation of the moving frame, or beam, passed through the center of mass of the frame (Figure 25). In this situation, the frame would not respond to linear displacements. By virtue of its rotational inertia, however, the frame would respond to a rotational motion in a vertical plane, i.e., tilting. In order to stabilize the klinograph, Schlüter adding a restoring force to one end of the beam. The instrument recorded photographically.
Schlüter operated his klinograph simultaneously with a horizontal pendulum seismograph. He calculated the tilt sensitivities of the two instruments and found them to be of the same order of magnitude. If an earthquake were recorded on the horizontal pendulum seismograph, and if the seismogram from this instrument represented tilting of the ground, then the earthquake would be well recorded on the klinograph. Contrary to what he had expected, Schlüter found that the klinograph recorded nothing at times when the horizontal pendulum seismograph recorded large earthquakes. He concluded that the horizontal pendulum was responding only to horizontal displacements, for which the klinograph had no sensitivity. Tilting, if it existed, was too small to affect either his klinograph or contemporary horizontal pendulum seismometers.
Schlüter's experiment, and theoretical considerations such as those of Schmidt, were accepted by many as strong evidence in favor of the viewpoint that seismographs responded largely to linear motion rather than tilting, except for waves of very long period (Wiechert, 1903). The experiment provided justification for neglecting the effect of tilt in theoretical studies of seismograph response. Those (such as Galitzin, 1902) who doubted the validity of Schlüter's experiment found the theory of a pendulum responding to both tilt and displacements to be so complicated that they were forced to neglect the effect of tilt as a matter of convenience (Galitzin, 1904). [However one of the authors of this paper (P B.), remembers when Father Macelwane changed the interpretation charts for the Berkeley Bosch-Omori pendulums to correspond to response to tilt rather than displacement. This was in 1923.]
The Göttingen Seismographs
We return to the history of the seismographs themselves. In 1898, E. Wiechert of Göttingen introduced a seismograph with a viscously-damped pendulum as a sensor (Wiechert, 1899). The damping was added to lessen the effects of the pendulum eigen-oscillations. Wiechert's first seismograph was a horizontal-pendulum instrument, which recorded photographically. After a trip to Italy to study seismometers used in that country, he decided to build a mechanically-recording seismograph. For a sensor, he used an inverted pendulum stabilized by springs and free to oscillate in any direction horizontally (Wiechert, 1904). The seismograph was completed in 1900.
In principle, Wiechert's inverted-pendulum seismometer resembled the inverted-pendulum seismometer of James Forbes, built sixty years earlier. The restoring springs, which kept the pendulum in stable equilibrium for small oscillations, were applied to the top of the inertial mass. At the base of the pendulum was a joint which permitted motion in any horizontal direction. The first description of the seismograph which we have found was published in 1904, after the instrument had undergone alterations in details of its construction (Wiechert, 1904). The 1904 pendulum (Figure 26) carried a mass of 1000 kilograms. [In later years, Wiechert inverted-pendulum seismometers were built with masses as light as 80 kilograms (Berlage, 1930, p. 434-435).] The relative motion of the mass with respect to the ground was resolved into perpendicular components, magnified 200 times by a mechanical lever system, and written on smoked paper. Time marks were put on the paper every minute by lifting the writing index off of the paper. For damping, Wiechert applied the motion of the pendulum mass to pistons which fit closely inside cylinders attached to the seismometer stand. Resistance of the air to the piston motion provided damping for the pendulum; this resistance was controlled by a valve which had the effect of regulating the amount of air space between the piston and the cylinder.
We have mentioned the work of W. Schlüter, a colleague of Wiechert's, who attempted to measure tilt with his klinograph. After he failed to record tilt, Schlüter converted his klinograph into a standard seismograph. By adding mass to one side of the klinograph and thus moving the instrument's center of mass away from the axis of rotation toward that side, he could make the klinograph sensitive to linear motion perpendicular to the line containing the center of mass and the axis of rotation. In particular, by moving the center of mass horizontally away from the axis of rotation, and maintaining it in that position with a vertical spiral spring, he could render the klinograph sensitive to vertical displacement. Schlüter obtained in this way the first long-period vertical-motion seismometer. As he finally developed the instrument, it was used with a period of sixteen seconds and a static magnification of 160. The klinograph was damped; it recorded photographically. Schlüter used compensation devices to remove drift due to temperature changes and changes in the stiffness of the spiral spring: most of the records reproduced by him show remarkably little drift (Figure 27).
Schlüter's klinograph obtained the first satisfactory records of longer-period vertical motion. Schlüter noted that, in general appearance, vertical-motion seismograms resembled horizontal-motion seismograms. There were differences, however, particularly in the onsets of earthquakes, which were much sharper on the vertical-motion seismograms than on horizontal-motion seismograms of the same earthquakes. For very distant earthquakes, further than 90 degrees away, the onset on the vertical-motion records occurred several minutes earlier than the onset on the horizontal-motion seismogram. Schlüter accordingly suggested that travel times might better be obtained from vertical-motion records than from horizontal-motion records.
Schlüter's klinograph seems to have been used only in Göttingen and only for a relatively short time. The high cost of photographic registration may have limited the use of the klinograph (Wiechert, 1907, p. 629). Because of the difficulties inherent in the design of a mechanically-recording vertical seismometer of medium period, Wiechert postponed the construction of such an instrument until after he had perfected his horizontal seismograph (Wiechert, 1904, p. 436). A mechanically-recording vertical seismograph with a period of five seconds was installed in Göttingen in 1905 (Wiechert, 1907, p. 629).
We end our history of early seismometers at the beginning of the twentieth century. The Wiechert inverted-pendulum seismometer is probably the earliest seismograph which is still used, in essentially its original form, in some modern seismological observatories. With the introduction of damped seismographs, seismologists had instruments with which it would be possible to calculate fairly accurate ground displacements for all recorded waves, not just short-period waves. Mathematical theory for calculating displacements from recorded waveforms would be forthcoming in the next decade (for example, Wiechert, 1903; Galitzin, 1904; Reid, 1910).
We have seen that a large number of instrumental needs were recognized by the turn of the century, including the need for a strain seismometer. The type of seismometer most obviously missing from our history of early seismometers is the electromagnetic seismograph, introduced by Galitzin (1903). The galvanometer was widely used in the nineteenth century; important improvements were made by some of the very men we have encountered in seismology, including Thomas Gray, W. E. Ayrton, and J. Perry (see references given by A. Gray, 1921). We find Thomas Gray simultaneously publishing papers on galvanometers and seismometers (Gray, 1887a, 1887b). Milne (1882a) even used a galvanometer in a seismoscope in 1879; the galvanometer indicated the output of a microphone with which Milne hoped to detect possible "creaking" of a fault preceding an earthquake. But no one in the nineteenth century seems to have tried to obtain an electrical analogue of earthquake motion and record it with a galvanometer.
We have described the early development of seismological instruments, from seismoscopes capable of giving only a few data to seismographs suitable for detailed studies of earth motion. We have seen that the first important step in seismometry was the use of an inertial system so arranged that it would be caused by an earthquake to move relative to the ground. The value of various types of pendulums for earthquake sensing instruments was realized early, probably as early as 132 A. D. Andrea Bina, in 1751, was the first to build an instrument for recording the relative displacement of the ground and a pendulum bob in an earthquake.
In these early years of seismology, emphasis was placed on measuring a few specific parameters of earthquake motion. Besides detecting the occurrence of an earthquake, almost all the instruments we have discussed gave an indication of the "direction" of the shock. Many were designed to record the relative "size" of an earthquake. Devices to record the time of an earthquake were proposed in the eighteenth century. Palmieri's apparatus, installed in 1856, seems to have been the first to give the "times" of shocks.
Cecchi may be regarded as the inventor, in 1875, of the earliest seismograph. Nevertheless, British scientists working in Japan in the 1880's must be given credit for developing the seismograph as a practical research instrument. At this time, most seismologists tried to obtain the longest possible periods for their instruments. Long common pendulums were used. The horizontal pendulum was introduced into seismology in Japan. The inverted pendulum, combined with a restoring force so that it would be in stable equilibrium, had been used for a seismometer by Forbes in 1840, and was tried again in Japan in the 1880's. A short-period instrument, to have a period less than the periods occurring in earthquake motion, was suggested by Perry and Ayrton in 1877.
The last decade of the nineteenth century saw seismographs designed to record teleseisms as well as local earthquakes. The first record of a distant earthquake had been obtained by von Rebeur-Paschwitz in 1889. Von Rebeur's seismograph recorded optically on a continuously moving photographic surface. Photographic recording made possible small seismographs of high sensitivity. The records given by mechanically-recording seismographs, however, were generally sharper and easier to read than those from photographically-recording instruments. Artificial viscous damping was first used in seismographs by Wiechert in 1898. In 1900, the first Wiechert inverted-pendulum seismograph was built.
The earliest mathematical theory of a seismograph was given by Forbes in 184l. Forbes considered only simple non-oscillatory ground displacements. A theory of the response of a seismograph to arbitrary, periodic, ground motion was written in Japan, by Perry and Ayrton in 1877, but it appears to have had little influence on the development of seismographs in that country. Later theoretical notes by Poincaré and Lippmann on integrating seismograms to obtain displacements seem also to have passed unnoticed by most seismologists in the nineteenth century. The importance of tilting in seismograms were debated; by the end of the century, the once widely-accepted view that teleseismic records represented tilting of the ground was being abandoned by many seismologists.
From History of Seismometry (to 1900) by James Dewey and Perry Byerly, originally in the Bulletin of the Seismological Society of America. Vol. 59, No. 1, pp. 183-227. February, 1969.
References are dated by their year of publication, when this is known. For some publications, such as volumes of Trans. Seism. Sec. Japan, the year of publication is not known. In these cases, we date the reference by the year given in the title of the particular volume. Abbreviations of most periodicals are taken from World List of Scientific Periodicals, 1900-1960, 4th edition, P. Brown and G. B. Stratton, Ed., Butterworths, London, 1963. Three other abbreviations are Bull. vulc. ital. (Bulleltino del Vulcanismo Italiano), Trans. Seism. Soc. Japan (Transactions Seismological Society of Japan), and Seism. J. Japan (Seismological Journal of Japan). An asterisk (*) beside a reference indicates that this reference was not available to us in its original form.
- Abbot, H. L. (1878). On the velocity of transmission of earth waves, Am. J. Sci. 115, 178-184.
- Agamennone, G. (1893). I terremoti e le perturbazioni magnetiche, Atti Accad. naz. Lincei Rc. ser. 5, 2, sem. 1, 479-483.
- Agamennone, G. (1894). I terremoti di lontana provenieza registrati al Collegio Romano, Atti Accad. naz. Lincei Rc., ser. 5, 7, sem. 1, 265-271.
- Agamennone, G. (1906). La Registrazione dei Terremoti, Casa Editrice "L'Ellettricista".
- Agamennone, G. (1926). L'inventore del sismografo a pendolo, La Meteorlogia Pratica 7, 264-266.
- anon. (1887). Studying earthquakes by electricity, The Electrical World 9, 129-130, 143, 152, 165- 166, 179.
- Baratta, M. (1895). Ricerche storiche sugli apparechi sismici, Annali Uff. cent. met. geodin. ital. ser. 2, 17, pt. 1, 3-37.
- Baratta, M. (1897). Per la storia della sismologia: sulla propagazione a distanze dei movimenti sismica, Riv. geogr. ital. 4, 425-442.
- Berlage, H. P. (1930). Seismometer, Handbuch der Geophisk 4, 299-526.
- Bertelli, T. (1873). Appunti storici intorno alle ricerche sui piccoli e spontanei moti dei pendoli fatte dal secolo XVII in poi, Bullettino di bibliografia e di storia delIe scienze matematiche e fisiche, di B. Boncampagni 6, 1-44.
- *Bina, D.A. (1751). Ragionamento sopra la cagione de tremuoti, ed in particolare de quello della terra di Gualdo Nocera nell'Umbria seguito l'anno 1751, Perugia (referenced in Agamennone, 1926).
- *Brassart, E. (1886). Annali Uff. cent. met. geodin. ital. 8, pt. 4. (referenced in Berlage, 1930, p. 301).
- Brune, J. N. and J. Oliver (1959). The seismic noise of the Earth's surface, Bull. Seism. Soc. Am. 49, 349-353.
- *Cancani, A. (1893). Sulle ondulazeoni provenienti da centri sismici lontani, Annali Uff. cent. met. geodin. ital. 15, pt. 1 (referenced in Schlüter, 1903, p. 323).
- Cancani, A. (1894). Sugli strumenti più addatti allo studio delle grandi ondulazioni provenienti da centri sismici lontani, Atti Accad. naz. Lincei Rc., ser. 5, 3, sem. 1, 551-555.
- Cancani, A. (1897). I pendoli orizzontali del R. Osservatorio geodinamico di Rocca di Papa, ed il terremoto indiano del 12 giugno 1897, Bull. Soc. sism. ital., 3, 235-240.
- *Cavalleri, P. G. M. (1858). Atti dell'I. R. Istituto di Scienze, Litt. ed. Arti, vol. i. part 2 (referenced in Cavalleri, 1860).
- Cavalleri, P. G. M. (1860). Description of a new seismometer constructed in the College at Monza, Phil. Mag. ser. 4, 19, 102-116. (This paper is extracted from Cavalleri, 1858, and translated by R. Mallet.)
- *Cavalli, A. (1785). Lettere meteorologiche romane dell'abate Atanagio Cavalli, Pagliarini, Roma (referenced in Baratta, 1895, p. 7).
- Cecchi, P. F. (1876). Sismografo elettrico a carte affumicate scorrevoli, Atti Acad. pontif. Nouvi Lincei 29, 421-428.
- Cirillo, N. (1747). The history of an earthquake which shook Apula and almost the whole kingdom of Naples, in 1731, Philosophical Transactions (from the year 1732 to the year 1744) abridged ... by John Martyn 8, 682-684. (Originally published in the Phil. Trans. R. Soc. in 1733.)
- Darwin, G. H. (1882). Report of the Committee ... appointed for the measurement of the lunar disturbance of gravity, Rep. Br. Ass. Advmt. Sci. 1881, 93-126.
- Darwin, G. H. (1883). On the measurement of the lunar disturbance of gravity, second report ..., Rep. Br. Ass. Advmt. Sci. 1882, 95-119. P> Davison, C. (1896). The horizontal pendulum, Natural Science, 8, 233-238.
- Davison, C. (1927). Founders of Seismology, Cambridge.
- Davison, C. (1936). Great Earthquakes, Thomas Murby & Co.
- *De la Hsute Feuille, G. (1703). Microscope micrometique ...avec un moyen de faire des Observations sur les Tremblemens de Terre, et les pouvoir predire, Paris (referenced in Favaro, 1884).
- *Delle Torre, Il Duca, (A. Filomarino) (1796). Gabinetto vesuviano, 2nd ed., Napoli, presso Domenico San Giacomo, 50-54 (referenced in Baratta, 1895, p. 30).
- Denza, P. F. (1887). Osservazioni fatte all'Osservatoria di Moncalieri sul terremoto del 23 febbraio 1887, Bollettino Mensulae dell'0sservatorio Centrale ... Moncalieri, ser. 2, 7, 68-70.
- De Rossi, M. S. (1874a). Annotazione, Bull. vulc. ital. 1, 53-56.
- De Rossi, M. S. (1874b). Bibliografia con annotazioni, Bull. vulc. ital. 1, 121-126.
- De Rossi, M. S. (1874c). Autosismografo orario ed economico, Bull. vulc. ital. 1, 141-148.
- De Rossi, M. S. (1875). Bibliografia con annotazioni, Bull. vulc. ital. 2, 98-126.
- De Rossi, M. S. (1876). Microsismografo ossia istrumento autografico per registrate le osservazioni dei movimenti microscopici del suolo, Atti Accad. ponlif. Nouvi Lincei, 29, 420.
- De Rossi, M. S. (1877). Guida prattica per le osservazioni sismiche, Bull. vulc. ital. 4, 5-42.
- De Rossi, M. S. (1883). Programma dell'osservatoria ed archivio centrale geodinamico ..., Bull. vulc. ital. 10, 49-121.
- De Rossi, M. S. (1887). Gli istrumenti sismometrici adoperati nel Giappone, Bull. vulc. ital. 14, 45-48.
- Dolomieu, D. de, 1784). Mémoire sur les tremblemens de terre de la Calabre pendant l'année 1783, Rome, 1784. (translated under the title "A dissertation on the earthquakes in Calabria Ultra in the year 1783" in Pinkerton's Voyages and Travels, 5, London, 1809, 273-297.)
- Du Bois, F. (1885). The Cecchi seismograph. A new model constructed for the observatory of Manila, Trans. Seism. Soc. Japan 8, 90-94.
- Ehlert, R. (1897a). Zusammenstellung, erlauterung, ... der wichtigsten seismometer ..., Beitr. Geophys. 3, 350-474.
- Ehlert, R. (1897b). Das dreifache horizontalpendel, Beitr. Geophys. 3, 481-494.
- Ewing, J. A. (1880a). A new form of pendulum seismograph, Trans. Seism. Soc. Japan 1, 38-43.
- Ewing, J. A. (1880b). On a new seismograph for horizontal motion, Trans. Seism. Soc. Japan 2, 45-49.
- Ewing, J. A. (1881a). Notes on some recent earthquakes, Trans. Seism. Soc. Japan 9, 40-48.
- Ewing, J. A. (1881b). On the observation of an earthquake at three or more stations to determine speed and direction of transit, Trans. Seism. Soc. Japan 3, 111-114.
- Ewing, J. A. (1881c). On a new seismograph, Proc. R. Soc. 31, 440-446.
- Ewing, J. A. (1881d). The earthquake of March 8, 1881, Trans. Seism. Soc. Japan 3, 121-128.
- Ewing, J. A. (1882a). A seismometer for vertical motion, Trans. Seism. Soc. Japan 3, 140-143.
- Ewing, J. A. (1882b). Note on the earthquake of March 11, 1882, Trans. Seism. Soc. Japan 4, 73-77.
- Ewing, J. A. (1883a). Earthquake measurement, Memoires of the Science Dept., Univ. of Tokyo, no. 9.
- Ewing, J. A. (1883b). Seismological notes, Trans. Seism. Soc. Japan 5, 89-91.
- Ewing, J. A. (1884). Measuring earthquakes, Nature, Lond. 30, 149-152, 174-177.
- Ewing, J. A. (1886). Earthquake recorders for use in observatories, Nature, Lond. 34, 343-344.
- Favaro, A. (1884). Contribuzioni alla storia della microsismologia, Atti Ist. veneto Sci., ser 6, 2, 91-103.
- Forbes, J. D. (1844). On the theory and construction of a seismometer, or instrument for measuring earthquake shocks, and other concussions, Trans. R. Soc. Edinb. 15, 219-228.
- Fouqué, F. (1888a). Les Tremblements de Terre, Bailliere, Paris.
- Fouqué, F. (1888b). Exposé et discussion des phénomènes qui ont signalé le tremblement de terre du 25 decembre 1884, Mém. Acad. Sci. Inst. Fr. 30, no. 2 (Mission D'Andalousie), 9-55.
- Fouqué, F. and M. Levy (1888). Expériences sur la vitesse de propagation des secousses ..., Mem. Acad. Sci. Inst. Fr. 30, no. 2 Mission D'Andalousie), 57-77.
- Fuller, M. L. (1912). The New Madrid earthquake, Bull. U. S. Geol. Surv. 494.
- Galitzin, B. (1902). Uber seismometrische beobachtungen, Isv. postoyann. tsent. seism. komm. 1, pt. 1, 101-183.
- Galitzin, B. (1903). Zur methodik der seismometrishen beobachtungen, Isv. imp. Akad. Nauk, ser. 5, 19, xxx-xxxi.
- Galitzin, B. (1904). Zur methodik der seismometrischen beobachtungen, Isv. postoyann. tsent. seism. komm. 1, pt. 3, 1-112.
- Galitzin, B. (1914). Vorlesungen über seismometrie, Teubner, 1914.
- Gerard, A. (1853). On pendulum observations, Edinburgh New Philosophical Journal, 55, 14-16.
- Giovannozzi, P. G. (1889). Il sismografo analizzatore del P. Filippo Cecchi D. S. P., Bull. vulc. ital. 15-16, 71-82.
- Grablovitz, G. (1891). Sulla astaticita in senso verticale della massa stazionaria o punto netro nei sismometrografi, Atti Accad. naz. Lincei Rc. ser. 4, 7, sem. 1, 337-344.
- Grablovitz, G. (1896a). Nouvi metodi per indagini geodinamiche, Boll. Soc. sism. ital. 2, 41-61.
- Gray, A. (1921). Absolule Measurements in Electricity and Magnetism, Macmillan.
- Gray, T. (1881). On instruments for measuring and recording earthquake-motions, Phil. Mag. ser. 5, 12, 199-212.
- Gray, T. (1882). A seismometer for registering vertical motion, Trans. Seism. Soc. Japan, 3, 137-139.
- Gray, T. (1883). On Gray and Milne seismographic apparatus, Q. J. Geol. Soc. Lond. 39, 218-223.
- Gray, T. (1887a). On silk vs. wire suspensions in galvanometers, Phil. Mag. ser. 5, 23, 46-51.
- Gray, T. (1887b). On an improved form of seismograph, Phil. Mag. ser. 5, 23, 353-364.
- Hecker, O. (1896). Das horizontalpendel, Z. Instrumkde. 16, 2-16.
- Hecker, O. (1899). Untersuchung von horizontalpendel-apparaten, Z. Instrumkde. 19, 261-269.
- Hecker, O. (1901). Ueber die vortheile der anwendung von instrumenten mit dämpfung für die erdbebenforschung, Z. Instrumkde. 21, 81-83.
- Hoernes, R. H. (1893). Erdbebenkunde, Veit, Leipzig.
- Holden, E. S. (1898). A Catalogue of Earthquakes on the Pacific Coast, 1769 to 1897, Smithson. misc. Collns. 1087, 17-22.
- Imamura, A. (1939). Tyoko and his seismoscope, Japanese Journal of Astronomy and Geophysics, 16, 37-41.
- Kater, H. (1818). An account of experiments for determining the length of the pendulum vibrating seconds in the latitude of London, Phil. Mag. 52, 96.
- Kreil, K. (1855). Über einen neuen erdbebenmesser, Sber. Akad. Wiss. Wien, Kl. 15, 370.
- Le Conte, J. (1882). Elements of Geology, 2nd ed., Appleton, 109.
- Lippmann, G. (1890). Sur la theorie et le mode d'emploi des appareils seismographiques, C. r. hebd. Séanc. Acad. Sci., Paris, 110, 440-444.
- Louderback, G. D. (1942). History of the University of California Seismographic Station and related activities, Bull. Seism. Soc. Am. 32, 205-229.
- Mallet, R. (1852). Second report on the facts of earthquake phenomena, Rep. Br. Ass. Advmt. Sci. 1851, 272-320.
- Mallet, R. (1859). Fourth report on the facts and theory of earthquake phenomena, Rep. Br. Ass. Advmt. Sci. 1858, 1-136.
- Mallet, R. (1862a). Account of experiments made at Holyhead to ascertain the transit velocity of waves, analogous to earthquake waves, through the local rock formation, Phil. Trans. R. Soc. 1861 151, 655-679.
- Mallet, R. (1862b). The First Principles of Observational Seismology, Chapman and Hall, Lond on.
- Milne, D. (1842). Report of a committee appointed at the Glasgov meeting ... for obtaining instruments and registers to record shocks of earthquakes in Scotland and Ireland, Rep. Br. Ass. Advmt. Sci. 1841, 46-49.
- Milne, D. (1843). Report of the committee ... for registering shocks of earthquakes in Great Britain, Rep. Br. Ass. Advmt. Sci. 1842, 92-98.
- Milne, J. (1880a). Seismic science in Japan, Trans. Seism. Soc. Japan 1, pt. 1, 3-34.
- Milne, J. (1880b). The earthquake in Japan of February 22, 1880, Trans. Seism. Soc. Japan, 1, pt. 2, 1-116.
- Milne, J. (1880c). Notes on the recent earthquakes of Yedo Plain, and their effects on certain buildings, Trans. Seism. Soc. Japan 2, 1-39.
- Milne, J. (1881a). Experiments in observational seismology, Trans. Seism. Soc. Japan, 3, 12-64.
- Milne, J. (1881b). Notes on the horizontal and vertical motion of the earthquake of March 8, 1881, Trans. Seism. Soc. Japan 3, 129-136.
- Milne, J. (1882a). Report ... earthquake phenomena of Japan, Rep. Brit. Ass. Advmt. Sci. 1881, 200-204.
- Milne, J. (1882b). Earth-tremors in Japan, Nature, Lond. 26, 125-126.
- Milne, J. (1882c). Seismology in Japan, Nature, Lond. 26, 627-631.
- Milne, J. (1883a). Second report ... earthquake phenomena in Japan, Rep. Brit. Ass. Advmt. Sci. 1882, 205-212.
- Milne, J. (1883b). Catalogue of earthquakes felt in Tokio between Jan. 1882 and March 1883, Trans. Seism. Soc. Japan 4, 32-35.
- Milne, J. (1884a). Third report of a committee ... earthquake phenomena in Japan, Rep. Brit. Ass. Advmt. Sci. 1883, 211-215.
- Milne, J. (1884b). On 387 earthquakes observed during two years in north Japan, Trans. Seism. Soc. Japan 7, 1-87.
- Milne, J. (I885a). Fourth report of the committee ... earthquake phenomena of Japan, Rep. Brit. Ass. Advmt. Sci. 1884, 241-252.
- Milne, J. (1885b). Seismic experiments, Trans. Seism. Soc. Japan 8, 1-82.
- Milne, J. (?) (1885c). Catalogue of earthquakes ..., Trans. Seis. Soc. Japan 8, 100-1 08.
- Milne, J. (1886a). Fifth report ... earthquake phenomena of Japan, Rep. Brit. Ass. Advmt. Sci. 1885, 362-379.
- Milne, J. (1886b). Earthquakes and other Earth Movements, Appleton, New York.
- Milne, J. (1887a). On a seismic survey made in Tokio in 1884 and 1885, Trans. Seism. Soc. Japan 10, 1-36.
- Milne, J. (1887b). Earth tremors in central Japan, Trans. Seism. Soc. Japan 11, 1-78.
- Milne, J. (1887c). Studying earthquakes by electricity, Electrical World, 9, 276.
- Milne, J. (1888a). Seventh report of the committee ... volcanic phenomena of Japan, Rep. Brit. Ass. Advmt. Sci. 1887, 212-226.
- Milne, J. (1888b). Modern forms of pendulum seismometers, Trans. Seism. Soc. Japan. 12, 21-28.
- Milne, J. (1888c). Relative motion of neighboring points of ground, Trans. Seism. Soc. Japan 12, 63-66.
- Milne, J. (1888d). The movement produced in certain buildings by earthquakes, Trans. Seism. Soc. Japan 12, 67-75.
- Milne, J. (1889). Eighth report ... earthquake and volcanic phenomena of Japan, Rep. Brit. Ass. Advmt. Sci. 1888, 422-437.
- Milne, J. (1893a). Preface, Seis. J. Japan 1.
- Milne, J. (1893b). Twelfth report ... earthquake and volcanic phenomena of Japan, Rep. Brit. Ass. Advmt. Sci. 1892, 93-129.
- Milne, J. (1893c). Earth pulsations in relation to certain natural phenomena and physical investigations, Seism. J. Japan 1, 87-112.
- Milne, J. (1893d). A note on the great earthquake of October 28, 1891, Seism. J. Japan 1, 127-151.
- Milne, J. (1893e). Abstract of a report to the British Association, Seism. J. Japan 2 , 93-109.
- Milne, J. (1894a). Investigation of the earthquake and volcanic phenomena of Japan. Thirteenth report ..., Rep. Brit. Ass. Advmt. Sci. 1893, 214-226.
- Milne, J. (1894b). A note on horizontal pendulums, Seism. J. Japan 3, 55-60.
- Milne, J. (1894c). Velocities of the earth waves, Seism. J. Japan 3, 87-89.
- Milne, J. (1897). Seismological investigations. -First report of the committee ..., Rep. Brit. Ass. Advmt. Sci. 1896, 180-230.
- Milne, J. (1898a). Seismological investigations. -Second report of the committee ..., Rep. Brit. Ass. Advmt. Sci. 1897, 129-206.
- Milne, J. (1898b). Seismology, 1st ed., Kegan Paul, Trench, Trubner & Co., London.
- Milne, J. (1899). Seismological investigations. -Third report of the committee..., Rep. Brit. Ass. Advmt. Sci. 1898, 179-272.
- Milne, J. (1900a). Seismological investigations. -Fourth report of the committee..., Rep. Brit. Ass. Advmt. Sci. 1899, 161-238.
- Milne, J. (1900b). Seismological investigations. --Fifth report of the committee..., Rep. Brit. Ass. Advmt. Sci. 1900, 59-108.
- Milne, J. (1901). Seismological investigations. -Sixth report of the committee... Rep. Brit. Ass. Advmt. Sci. 1901, 40-54.
- Milne, J. (1905). Preliminary notes on observations made with a horizontal pendulum in the Antarctic regions, Proc. R. Soc. 76A, 284-295.
- Milne, J. and T. Gray (1883). On seismic experiments, Phil. Trans. R. Soc. 173, pt. 3 , 863-883.
- Milne, J. and F. Omori (1893). On the overturning and fracturing of brick and other columns by horizontally applied motion, Seism. J. Japan 1, 59-85.
- Nature (1886-1887). 35, 36, 75-76, 126, 172-173, 198, 559-560, 606.
- Needham, J. (1959). Science and Civilization in China, 3, Cambridge, 624-635.
- Nyren, M. (1878). Erderschütterung beobachtet en einem feinem niveau 1877 Mai 10, Izv. imp. Akad. Nauk 24, 567.
- Oddone, E. (1900). Richerche strumentali in sismometri con non pendolari, Boll. Soc. sism. ital. 6, 168-186.
- Oldham, R.D. (1899). Report on the great earthquake of 12 June 1897, Memoirs of the Geological Survey of India, 29.
- Oldham, R.D. (1900). On the propagation of earthquake motion to great distances, Phil. Trans. R. Soc., ser. A, 194, 135-174.
- Omori, F. (1899), Horizontal pendulums for the mechanical registration of seismic and other earth movements, J. College of Science, Imperial University of Tokyo 11, 121-145.
- Omori, F. (1901a). Results of horizontal pendulum observations of earthquakes, Bull., Earthquake Investigation Commitee, no. 5.
- Omori, F. (1901b). Uber eigenschwingungen der erdbebenmesser, Die Erdbebenwarte, 1, no. 4, 37-42.
- *Oriani, D.B. (1783). Osservazioni sull'oscillazione della terra in occasione di terremoto ..., Opuscoli scelti sulle scienze e arti 6, 277-280 (referenced in Baratta, 1895, p. 35).
- Pacher, G. (1897). I microsismografi dell'Istituto di Fisica, Atti. Ist. veneto Sci. ser. 7, 8, 1110-1171.
- Palmieri, L. (1862a, 1864, 1866, 1867, 1869, 1870, 1876). Letters, Rc. Accad. Sci. fis. mat., Napoli, 1, 145; 3, 35-36; 5, 102; 6, 130-131; 8, 146-147; 9, 127-128; 15, 95.
- Palmieri, L. (1862b). Sur les secousses de tremblement de terre ..., C. r. hebd. Seanc. Acad. Sci., Paris 54, 608-611.
- Palmieri, L. (1871). The electomagnetic seismograph (translated by B. O. Duncan), Rep. Smithson. Instn. 1870, 425-428.
- *Palmiere, L. (1874). Il Sismografo Portatile, Naples, 1874 (reviewed by M. S. de Rossi in Bull. vulc. ital. 2, 66-68, 1874).
- Perry, J. and W. E. Ayrton (1879). On a neglected principle that may be employed in earthquake measurement, Phil. mag. ser. 5, 8, 30-50.
- Poincaré, (1888) in Fouqué, F. Les Tremblements de Terre, Bailliere, Paris, 46-47.
- Rayleigh, Lord (J. W. Strutt) (1885). On waves propagated along the plane surface of an elastic solid, Porc. Lond. Math. Soc. 17, 4-11.
- Reid, H. F. (1910). The mechanics of the earthquake, Report, California Earthquake Commission, 2.
- Roberto, G. (1887). I sismografi del P. Cecchi, Bollettino Mensuale dell'Osservatorio Centrale ... Moncalieri, ser 2, 7, 181-182.
- Rood, O. N. (1875). On the application of the horizontal pendulum to the measurement of minute changes in the dimensions of solid bodies, Am. J. Sci. 9, 444-454.
- *Salfi, F. (1787). Saggio di fenomeni antropologici relativi al tremuoto, Flauto, Naples (referenced in Baratta, 1895, p. 2).
- *Salsano, D. (1783). Descrizione di un geo-sismometro o sia misuraterremoto ..., Nouvo giornale enciclopedico, novembre 1873, Vicenza, 89-95 (referenced in Barattam 1895, p. 23).
- Schlüter, W. (1903). Schwingingsart und Weg der Erdbebenwellen, Beitr. Geophys, 5, 314-359, 401-465.
- Schmidt, A. (1896). Die Aberration der Lothlinie, Beitr. Geophys. 3, 1-15.
- Seismological Society of Japan (1880). List of members, December 1881, Trans. Seism. Soc. Japan, July-December 1880, 2, p. 100.
- Sieberg, A. (1923). Erdbebenkunde, Fischer, Jena, 426-450.
- *Torcia, M. (1784). Descrizione del tremuoto accaduto nella Calabria e a Messina alli 5 febbraio, Nuovo giornale enciclopedico, april 1784. (referenced in Baratta, 1895, p. 25).
- Vicentini, G. and G. Pacher (1896). Considerazioni sugli apparecchi sismici registratori e modificazione del microsismografo a due componenti, Boll. Soc. sism. ital. 11, 107-121.
- Vicentini, G. and G. Pacher (1898). Microsismografo per la compomente verticale, Atti Ist. veneto Sci. ser. 7, 10, 65-89.
- Von Rebeur-Paschwitz, E. (1889). The earthquake of Tokio, April 18, 1889, Nature, Lond. 40, 294-295.
- Von Rebeur-Paschwitz, E. (1893). Über die Aufzeichnung der Fernwirkungen von Erdbeben, Petermanns Mitt. 39, 201-212.
- Von Rebeur-Paschwitz, E. (1894). Das horizontalpendel ..., Nova Acta Acad. Ceasar. Leop. Carol. 60, 1-216.
- Von Rebeur-Paschwitz, E. (1895a). Horizontalpendel-Beobachtungen auf der Kaiserlichen Universitäts-Sternwarte zu Strassburg 1892-1894, Beitr. Geophys. 2, 211-535.
- Von Rebeur-Paschwitz, E. (1895b). Europäische Beopachtungen des grossen japanischen Erdbebens vom 22. März 1894 ..., Petermanns Mitt. 41, 13-21, 39-42.
- Wagener, G. (1880). On a new seismometer, Trans. Seism. Soc. Japan 1, 54-72.
- Wang Chen-To (1936). Yenching Univ. J. of Chinese Studies, 20, 577 (referenced in Needham, 1959, p. 739).
- Wiechert, E. (1899). Seismometrische Beobachtungen im Göttinger Geophysikalischen Institut, Nachr. Ges. Wiss. Göttingen 1899, 195-208.
- Wiechert, E. (1903). Theorie der automatischen Seismographen, Abh. K. Bes. Wiss. Göttingen Klasse N. F. 2 1902-1903, 1-128.
- Wiechert, E. (1904). Ein astatisches Pendel höher Empfindlichkeit zur mechanischen Registrierung von Erdbeben, Beitr. Geophys 6, 435-450.
- Wiechert, E. (1907). Jahresbericht ..., Beitr. Geophys. 8, 603-636.
- Zöllner, F. (1869). Ueber eine neue Methode zur Messung anziehender und abstossender Kräfte, Ber. sächs. Akad. Wis. Math.-nat. Klasse 21, 280-284.
- Zöllner, M. F. (1872). On the origin of the earth's magnetism and the magnetic relations of the heavenly bodies. Phil. Mag. ser. 4, 43, 345-365, 446-469, 481-502.