Oil in the Marine Environment

Tarballs

September 14, 2010, 4:03 pm
Source: NOAA
Content Cover Image

President Barack Obama and LaFourche Parish President Charlotte Randolph show small amounts of oil washed up as “tar balls” at Port Fourchon, La., on May 28, 2010. Credit: AP Photo/Evan Vucci

A tarball is a blob of petroleum that has been weathered after floating in the ocean. When crude oil (or a heavier refined product) floats on the ocean surface, its physical characteristics change. During the first few hours of an oil spill, the oil spreads into a thin slick. Winds and waves tear the slick into smaller patches that are scattered over a much wider area. Various physical, chemical, and biological processes change the appearance of the oil. These processes are generally called weathering.

Initially, the lighter components of the oil evaporate much like a small gasoline spill. In the cases of heavier types of oil, such as crude oil or home heating oil, much of the oil remains behind. At the same time, some crude oils mix with water to form an emulsion that often looks like chocolate pudding. This emulsion is much thicker and stickier than the original oil. Winds and waves continue to stretch and tear the oil patches into smaller pieces, or tarballs. While some tarballs may be as large as pancakes, most are coin-sized (a relatively large tarball is shown in the photo above). Tarballs are very persistent in the marine environment and can travel hundreds of miles.

Weathering processes eventually create a tarball that is hard and crusty on the outside and soft and gooey on the inside, not unlike a toasted marshmallow. Turbulence in the water or beach activity from people or animals may break open tarballs, exposing their softer, more fluid centers. Scientists have not been very successful at creating weathered tarballs in the laboratory and measuring the thickness of the crusty outer layer. Therefore, we don't know how much energy is needed to rupture a tarball.

caption President Obama visits the shores of Fourchon
Beach, Louisiana. Credit: Blogs.America.gov
We do know that temperature has an important effect on the stickiness of tarballs. As air and water temperatures increase, tarballs become more fluid and, therefore, sticky--similar to an asphalt road warmed by the summer sun. Another factor influencing stickiness is the amount of particulates and sediments present in the water or on the shoreline, which can adhere to tarballs. The more sand and debris attached to a tarball, the more difficult it is to break the tarball open. These factors make it extremely difficult to predict how long a tarball will remain sticky.

For most people, an occasional brief contact with a small amount of oil, while not recommended, will do no harm. However, some people are especially sensitive to chemicals, including the hydrocarbons found in crude oil and petroleum products. They may have an allergic reaction or develop rashes even from brief contact with oil. In general, we recommend that contact with oil be avoided. If contact occurs, wash the area with soap and water, baby oil, or a widely used, safe cleaning compound such as the cleaning paste sold at auto parts stores. Avoid using solvents, gasoline, kerosene, diesel fuel, or similar products on the skin. These products, when applied to skin, present a greater health hazard than the smeared tarball itself.

There is no magic trick to making tarballs disappear. Once tarballs hit the beaches, they may be picked up by hand or by beach-cleaning machinery. If the impact is severe, the top layer of sand containing the tarballs may be removed and replaced with clean sand.

 

Glossary

Citation

Nomack, M. (2010). Tarballs. Retrieved from http://www.eoearth.org/view/article/51cbef9b7896bb431f69e401

0 Comments

To add a comment, please Log In.